发光学报, 2012, 33 (5): 540, 网络出版: 2012-06-11
刮涂法制备聚合物薄膜太阳能电池
Polymer Solar Cells Fabricated with Doctorblade Coating Technique
摘要
系统地研究了采用刮涂法制备聚合物薄膜太阳能电池时刮涂速度和基底温度对活性层厚度以及形貌的影响。当刮涂速度增加或者基底温度降低时,由于溶液粘度和表面张力的变化导致活性层厚度增加。与旋涂方法相比,刮涂方法制备的活性层薄膜具有更小的粗糙度和精细的相分离结构,从而减少了光伏电池的漏电流并提高了填充因子。利用刮涂方法制备的聚合物太阳能电池能量转换效率达到了4.2%。
Abstract
The poly(3hexylthiophene):[6,6]phenyl C61butyric acid methyl ester (P3HT∶PCBM) bulkheterojunction polymer solar cells fabricated with doctorblade coating were studied. It is found that the active layer thickness increases with increasing the coating speed or lowing substrate temperature, which is attributed to the changes of solution viscosity and surface tension. Moreover, the P3HT∶PCBM active layer produced by doctorblade coating demonstrates fine donoracceptor nanoscale phase separation favoring enhancing exciton dissociation and charge collection. A 4.2% P3HT∶PCBM solar cell was fabricated with doctorblade coating technique.
吴江, 谢志元. 刮涂法制备聚合物薄膜太阳能电池[J]. 发光学报, 2012, 33(5): 540. WU Jiang, XIE Zhiyuan. Polymer Solar Cells Fabricated with Doctorblade Coating Technique[J]. Chinese Journal of Luminescence, 2012, 33(5): 540.