为了获得高能量、高效率的钕玻璃前置放大器，设计了一套钕玻璃再生放大系统。通过调节单程增益和优化腔模设计，使得增益介质中的小尺度自聚焦效应得到有效控制。在重复频率1 Hz运行下，获得最大输出能量21 mJ、脉冲宽度2.65 ns的激光输出，相应的光光转换效率为5%，总增益达108，光束质量因子M2=1.5，脉冲能量稳定性均方根(RMS)值小于2%(超过2 h连续工作)，光谱的中心波长为1052.92 nm。

To obtain high energy, high efficiency Ndglass preamplifier, a Ndglass regenerative amplifier system is designed. By adjusting the single pass gain and carefully optimizing the cavity mode, the small-scale self-focusing effect in the gain medium is effectively controlled. Maximum pulse energy of 21 mJ, pulse width of 2.65 ns is obtained at the repetition frequency of 1 Hz, corresponding to a high optical-optical conversion efficiency of 5% and amplification ratio of 108. The root-mean-square (RMS) of pulse to pulse energy stability is less than 2% during 2 h continuous operation. The laser has a good beam quality of M2=1.5. The spectrum is measured to be at center wavelength of 1052.92 nm.