光学学报, 2012, 32 (10): 1031002, 网络出版: 2012-07-17   

提高极紫外光谱纯度的多层膜设计及制备

Design and Fabrication of the Multilayer Film of Enhancing Spectral-Purity in Extreme Ultraviolet
作者单位
1 中国科学院长春光学精密机械与物理研究所, 吉林 长春 130022
2 中国科学院研究生院, 北京 100049
摘要
极紫外光刻是实现22 nm技术节点的候选技术。极紫外光刻使用的是波长为13.5 nm的极紫外光,但在160~240 nm波段,极紫外光刻中的激光等离子体光源光谱强度、光刻胶敏感度以及多层膜的反射率均比较高,光刻胶在此波段的曝光会降低光刻系统的光刻质量。从理论和实验两方面验证了在传统Mo/Si多层膜上镀制SiC单层膜可对极紫外光刻中的带外波段进行有效抑制。通过使用X射线衍射仪、椭偏仪以及真空紫外(VUV)分光光度计来确定薄膜厚度、薄膜的光学常数以及多层膜的反射率,设计并制备了[Mo/Si]40 SiC多层膜。结果表明,在极紫外波段的反射率减少5%的前提下,带外波段的反射率减少到原来的1/5。
Abstract
Extreme ultraviolet lithography (EUVL) has been regarded as a promising lithographic technology for the 22 nm hp node. It takes advantage of the light of extreme ultraviolet (EUV) whose wavelength is 13.5 nm. But in the 160~240 nm band, laser produced plasma light source spectral intensity, photoresist sensitivity and the reflectivity of multilayers are relatively large in the EUVL. The exposure of photoresist will reduce the lithographic quality in the out-of-band. It demonstrates that both theoretically and experimentally, coating the SiC layer on the Mo/Si multilayer can effectively suppress the out-of-band radiation. Designing and fabricating [Mo/Si]40 SiC multilayers take advantage of X-ray diffraction, spectroscopic ellipsometry, vacuum ultraviolet (VUV) spectrophotometer to determine the thickness and optical constants of thin films and the reflectivity of multilayers. The reflectivity of the out-of-band reduces to 1/5, while the reflectivity of in-band only 5% reduction.

祝文秀, 金春水, 匡尚奇, 喻波. 提高极紫外光谱纯度的多层膜设计及制备[J]. 光学学报, 2012, 32(10): 1031002. Zhu Wenxiu, Jin Chunshui, Kuang Shangqi, Yu Bo. Design and Fabrication of the Multilayer Film of Enhancing Spectral-Purity in Extreme Ultraviolet[J]. Acta Optica Sinica, 2012, 32(10): 1031002.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!