应用光学, 2012, 33 (4): 784, 网络出版: 2012-09-12   

红外跟踪系统中非球面硅透镜加工技术研究

Processing technology of aspheric silicon lens in IR tracking system
作者单位
长春理工大学 光电工程学院, 吉林 长春 130022
摘要
随着军用光学仪器的飞速发展,红外光学材料单晶硅广泛应用于红外光学元件和半导体行业,为了满足精密仪器对光学系统的要求,对光学元件的面型精度要求越来越高。针对红外跟踪系统中对高精度单晶硅透镜的加工技术要求,以Ф26 mm的单晶硅透镜为例,通过多次反复研磨修抛和检测分析,并不断优化工艺参数,设计了特殊的夹具,解决了单晶硅表面光洁度问题以及中心偏差难以控制的加工技术难题,并实现了批量生产。经检测,单晶硅非球面面形精度达到0.2 μm,表面光洁度达到Ⅲ级以上,中心偏差在1 μm以内,各项参数均满足了红外跟踪系统的要求。
Abstract
With the rapid development of military optical instruments, IR optical materials have been widely used in IR optical elements and semiconductor industry, especially single-crystal silicon. To meet the precision instruments requirement for the optical system, the surface figure of the optical components has been increasingly demanded. Aiming at the processing technology requirement of high-precision silicon lens in the IR tracking system, taking a Ф26mm silicon lens as an example, by repeatedly grinding, repair/polishing, testing analysis, continuous optimization of the process parameters and designing a special fixture, this paper solved the problem of the silicon surface smoothness and the difficult control of the center deviation, and achieved mass production. After testing, the precision of the single-crystal silicon aspheric surface figure got 0.2μm, the surface smoothness achieved above the grade Ⅲ and the center deviation was less than 1μm. All the parameters met the requirements of the infrared tracking system.

马放, 付秀华, 贾宗合, 谢影, 唐昊龙. 红外跟踪系统中非球面硅透镜加工技术研究[J]. 应用光学, 2012, 33(4): 784. MA Fang, FU Xiu-hua, JIA Zong-he, XIE Ying, TANG Hao-long. Processing technology of aspheric silicon lens in IR tracking system[J]. Journal of Applied Optics, 2012, 33(4): 784.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!