应用激光, 2012, 32 (4): 299, 网络出版: 2012-09-24   

基于Taguchi的铜合金薄板脉冲激光弯曲成形工艺研究

Laser Bending Parameters and Control Factor Levels
作者单位
1 淮阴工学院机械工程学院江苏省数字化制造技术重点建设实验室, 江苏 淮安 223003
2 江苏大学机械工程学院, 江苏 镇江 212013
摘要
为研究铜合金薄板的脉冲激光弯曲成形工艺, 基于 Taguchi方法对单道单次扫描成形 V形件的工艺进行了正交试验设计。以弯曲角为响应目标, 以望大特性的信噪比评估弯曲角的品质特性, 得到了最佳工艺参数组合: 激光功率 P为 24W, 扫描速率淄为 500 mm/min, 离焦量 L为 4 mm, 实验测得弯曲角为 1.362毅。在成形 V形件的实验基础上采用多道多次扫描方式进行了预定曲率半径的圆弧曲面成形实验。依据扫描次数与弯曲角之间的关系规划了扫描路径和扫描次数, 实验结果与预设目标有较好的一致性; 半路径扫描比全路径扫描更能得到理想的变形效果和表面质量。实验中发现, 因铜合金薄板热传导率高、厚度小, 激光扫描时上下表面的温度梯度不太明显, 成形机理以屈曲机理为主。
Abstract
In order to study pulsed laser bending process for C194 copper alloy thin-plate, based on Taguchi method orthogonal testis adopted to form V -shape by signal scan. Using signal -to -noise ratio (larger -the -better), the effect of the bending angle isevaluated, and the optimal combination of laser process parameters is obtained, that is, laser power is 24 W, scanning speed is 500mm/min, defocusing amount is 4mm, and the experimental result of bending angle is 1.362毅. Based on the experiment of forming V-shape, the pulsed laser forming experiment of circular-arc surface with predetermined curvature radius by repeated multiple -passscanning is carried out. Scanning path and scanning times are planned based on the relationship between the scanning times and thebending angle, the experimental result and the presupposition target are in good agreement; ideal shape and excellent surface qualitycan be obtained by the method of half path scan in width. It has been found during experiments that due to high thermal conductivityand film thickness of copper alloy thin -plate, the temperature gradient between upper and lower surfaces is insignificant in theprocess of multiple-pass scan by pulsed laser, and buckling mechanism plays a dominant role in laser bending.

蒋素琴, 周建忠, 胡玲玲, 吴建华, 裴旭. 基于Taguchi的铜合金薄板脉冲激光弯曲成形工艺研究[J]. 应用激光, 2012, 32(4): 299. Jiang Suqin, Zhou Jianzhong, Hu lingling, Wu Jianhua, Pei Xu. Laser Bending Parameters and Control Factor Levels[J]. APPLIED LASER, 2012, 32(4): 299.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!