强激光与粒子束, 2012, 24 (11): 2637, 网络出版: 2012-10-12   

计算全息检测离轴非球面的离散相位拟合

Fitting of discrete phase of computer generated hologram for off-axis aspheric test
李世杰 1,2,*伍凡 1陈强 1
作者单位
1 中国科学院 光电技术研究所, 成都 610209
2 中国科学院 研究生院, 北京 100039
摘要
为了计算补偿用计算全息图的刻线位置, 需要对光线追迹得到的离散相位数据进行拟合。为此详细推导了均匀三次B样条和非均匀三次B样条的基函数, 介绍了各自对应的曲面拟合方法。以一块抛物型离轴非球面数据为例, 对其非对称的离散相位分布进行了三次B样条曲面拟合。拟合结果表明, 三次B样条曲面拟合能使拟合面经过所有数据点, 保证拟合精度, 且得到的连续的相位补偿函数表达式结构简单(最高次数只有3次),还能根据实际情况优化采样点数量, 控制计算量。
Abstract
The discrete phase data should be fitted to calculate the reticle position of computer generated holograms (CGHs) for off-axis aspheric surfaces. The basis functions of uniform B-spline and non-uniform B-spline were deduced in detail, and the corresponding fitting methods were introduced. With an off-axis paraboloid as an example, its discrete phase data was got and fitted by uniform B-spline and non-uniform B-spline. The results show that all the data points are on the fitting surface and the fitting accuracy can meet the requirement. Meanwhile, the expression of the phase function is very simple (the highest order is only three). Moreover, the sample points can be optimized to control the amount of calculation.

李世杰, 伍凡, 陈强. 计算全息检测离轴非球面的离散相位拟合[J]. 强激光与粒子束, 2012, 24(11): 2637. Li Shijie, Wu Fan, Chen Qiang. Fitting of discrete phase of computer generated hologram for off-axis aspheric test[J]. High Power Laser and Particle Beams, 2012, 24(11): 2637.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!