光子学报, 2012, 41 (11): 1261, 网络出版: 2012-11-06   

光纤布喇格光栅应变传感器结构优化研究

Structure Optimization of Fiber Bragg Grating Strain Sensors
作者单位
1 电子科技大学 光纤传感与通信教育部重点实验室,成都 611731
2 川庆钻探工程有限公司 安全环保质量监督检测研究院,四川 广汉 618300
摘要
提出了一种改进的光纤光栅应变传感器结构,用有限元分析软件对其进行建模和静力仿真,得到其应力分布和光栅区域的应变情况.在整体宽度与厚度相等的情况下,此结构的灵敏度约为传统“工”字型结构的600倍.进一步分析了其关键区域的6个结构参量对应变灵敏度及量程的影响.筛选、设计并加工出不同尺寸的两种应变片,分别用UV胶与玻璃焊料对光栅进行封装,得到灵敏度分别为:249 pm/N、330 pm/N和1.1 pm/N.比较分析表明,本文提供的分析方法与数据,可为不同工程应用场合的最优结构设计提供依据.
Abstract
The dependence of a fiber Bragg grating strain sensor on the improved structure parameters was investigated both numerically and experimentally. The stress distribution and the strain of the grating region was obtained. In the case of the overall width and thickness are equal, the sensitivity of this structure is about 600 times higher than the traditional I-shaped structure. The influence of the 6 key structure parameters on the strain sensitivity and the measurement range was analyzed in detail. Experimental results were also given compared with the numerical simulated results. The gratings were packaged respectively with UV glue and glass solder to get the sensitivities were: 249 pm/N, 330 pm/N and 1.1 pm/N. The analysis method and data provided a basis for structural optimum design of fiber Bragg grating strain sensors in different applications.

袁子琳, 龚元, 马耀远, 杜磊, 吴宇, 饶云江, 吴慧娟, 王浚璞, 万夫. 光纤布喇格光栅应变传感器结构优化研究[J]. 光子学报, 2012, 41(11): 1261. YUAN Zi-lin, GONG Yuan, MA Yao-yuan, DU Lei, WU Yu, RAO Yun-jiang, WU Hui-juan, WANG Jun-pu, WAN Fu. Structure Optimization of Fiber Bragg Grating Strain Sensors[J]. ACTA PHOTONICA SINICA, 2012, 41(11): 1261.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!