光子学报, 2013, 42 (1): 94, 网络出版: 2013-01-16   

变焦曲线拟合方法的比较与研究

Comparison and Research of Zoom Curve Fitting Methods
作者单位
长春理工大学 光电工程学院,长春 130022
摘要
在机械补偿变焦距光学系统中,通过利用变焦曲线控制变倍组与补偿组的移动来达到变焦目的.因此,为使变焦距光学系统在变焦过程中能够始终成像清晰且稳定,拟合出良好的变焦曲线是十分必要的.本文运用动态光学理论、CODE V和ZEMAX宏三种方法分别对一个20倍变焦距光学系统进行变焦曲线拟合,得到相应的运动曲线方程.根据所得到的三组曲线方程,随机选取若干变焦位置点,分别对这些位置点的光学系统离焦量、中心视场MTF和边缘视场MTF进行评价.数据分析表明,动态光学理论拟合出的变焦曲线在满足系统要求前提下更能够保证像面的稳定性.
Abstract
In mechanical compensation zoom optical system, the zoom can be achieved through the zoom curve to control the movement of the zoom group and the compensation group. Therefore, it is very necessary to fit a good zoom curve to make the imaging of zoom optical system clear and stable during the zoom process. In this paper, the dynamic optical theory, CODE V and ZEMAX macro are used individually to fit zoom curve for a 20× zoom optical system, then the corresponding movement curve equations can be generated. According to the three groups of curve equations, several random zoom position points are selected and evaluated in defocus and MTF of central field and edge field. Through the analysis of the data, the zoom curve fitted by the dynamic optical theory can meet the system requirements, and it is better to ensure the image plane stable.

高天元, 侯振岩. 变焦曲线拟合方法的比较与研究[J]. 光子学报, 2013, 42(1): 94. GAO Tian-yuan, HOU Zhen-yan. Comparison and Research of Zoom Curve Fitting Methods[J]. ACTA PHOTONICA SINICA, 2013, 42(1): 94.

本文已被 8 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!