光学技术, 2013, 39 (1): 19, 网络出版: 2013-01-24   

光学系统透镜热形变特性仿真研究

Research on heat deformation properties of optical system lenses
作者单位
1 北京理工大学 机械与车辆学院, 北京 100081
2 航天科工集团二院二十五所, 北京 100854
摘要
光学系统透镜组件在环境温度变化时发生的形变, 特别是透镜的厚度、面形以及透镜间空间位置的变化, 对系统成像质量有着不可忽视的影响。分析计算了某型导引头光学系统透镜组件在温度载荷下的形变特性。计算结果表明, 当环境温度从20℃降低到-40℃时, 透镜表面位移呈现出显著的梯度变化, 7个透镜中表面的最大位移达0.05mm, 透镜厚度的变化率超过0.05%, 透镜间距离的最大变化率为3.46%。利用数据重构技术, 计算结果可以作为透镜镜面形变分析的参考数据。
Abstract
The image quality is affected by the deformations of the optical system lenses, especially their thickness, surface and position when the ambient temperature changes. The deformation properties of the optical system lenses of a seeker under temperature load are analyzed. The results show that there is a significant gradient of the lens surface displacement, when the ambient temperature is reduced from 20℃ to -40℃. The maximum surface displacement of the 7 lenses is up to 0.05mm, the change rate of lenses thickness is more than 0.05%, the greatest change rate of the distance between the lenses is 3.46%. The simulation results are going to be used to analyze the lens surface shape change using data reconstruction techniques.

韩建保, 江长春, 张聪跃, 吴亚鹏, 熊健. 光学系统透镜热形变特性仿真研究[J]. 光学技术, 2013, 39(1): 19. HAN Jianbao, JIANG Changchun, ZHANG Congyue, WU Yapeng, XIONG Jian. Research on heat deformation properties of optical system lenses[J]. Optical Technique, 2013, 39(1): 19.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!