现代显示, 2013, 24 (3): 7, 网络出版: 2013-04-07  

基于时序彩色原理提高LCoS显示分辨率的方法

The Method of LCoS Display Resolution Improvement Based on the Principle of Sequential Colorization
赵瑜 1,2,*范伟 1代永平 2
作者单位
1 深圳市长江力伟股份有限公司, 广东 深圳 518109
2 南开大学光电子所, 天津 300071
摘要
文章设计了一种采用显示分辨率为QVGA的LCoS显示屏实现480×480分辨率显示的方法, 采用的LCoS屏的像素排列为品字型阵列, 每个有效像素由RGB三个像素单元组成, 采用空间混色的方式, 最大可实现320×240分辨率显示, 设计依据时序彩色原理, 采用分辨率提升的设计方法, 由320×240分辨率提升到480×480分辨率, 显示图像的分辨率提高了3倍, 相对于空间混色方式, 显示图像较之前更为细腻、显示亮度更高、颜色质量更好。
Abstract
In the paper a method which use a LCoS at effective resolution QVGA to display at resolution 480×480 has been designed, the LCoS screen pixel array using a triangle array, each effective pixel compose three RGB units, using space blending mode, LCoS can achieve a display at maximum resolution of 320×240, with the method based on the principle of sequential color we can enhance the resolution up of from 320×240 to 480×480, the resolution of the image is increased three times relatived to the space blending mode, the display image is more delicate, higher brightness, better color quality than before.

赵瑜, 范伟, 代永平. 基于时序彩色原理提高LCoS显示分辨率的方法[J]. 现代显示, 2013, 24(3): 7. ZHAO Yu, FAN Wei, DAI Yong-ping. The Method of LCoS Display Resolution Improvement Based on the Principle of Sequential Colorization[J]. ADVANCED DISPLAY, 2013, 24(3): 7.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!