强激光与粒子束, 2013, 25 (5): 1293, 网络出版: 2013-04-08   

2.0 MJ脉冲功率源的500 kA气体开关系统

500 kA switch-trigger system for 2.0 MJ capacitive pulsed power supply
作者单位
1 中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
2 华中科技大学 电气与电子工程学院, 武汉 430074
摘要
介绍了用于2.0 MJ激光泵浦源的新型高功率闭合开关系统的主要功能部件及其设计、研制和测试过程, 分析给出了该气体开关系统的关键器件设计所依据的数学原理。在2.0 MJ电容储能的模拟脉冲电源平台上的实际测试表明, 该气体开关系统的峰值通流能力达到500 kA, 单次放电转移电荷量不低于150 C, 累积寿命超过200 kC, 理论上能同时支持20对(40只)氙灯工作。开关本体的石墨电极头还可以更换, 能进一步延长寿命。该气体开关系统的总体性能接近同期国外同类型产品的指标要求。
Abstract
A switch-trigger system for a 2.0 MJ pulsed power supply module has been developed. This paper discusses the design, construction and testing of this switch-trigger system. In the section about the mathematical principles, the equations of the lifetime and stability of the spark gap switch and its trigger generator are given. Extensive testing has proved the operating parameters of the switch-trigger system. The measured discharge current of the 2.0 MJ capacitive pulsed power supply module is demonstrated to be over 500 kA and the transfer charge per shot is over 150 C. The switch trigger system can support more than 200 kC transfer charge, and it can support simultaneous operation of 20 pairs of xeon flash lamps in theory. Moreover, the lifetime of this switch can be extended by replacing the graphite electrodes adopted.

何伟, 李黎, 郑万国, 童金禄, 申晨, 郭良福, 赖贵友. 2.0 MJ脉冲功率源的500 kA气体开关系统[J]. 强激光与粒子束, 2013, 25(5): 1293. He Wei, Li Li, Zheng Wanguo, Tong Jinlu, Shen Chen, Guo Liangfu, Lai Guiyou. 500 kA switch-trigger system for 2.0 MJ capacitive pulsed power supply[J]. High Power Laser and Particle Beams, 2013, 25(5): 1293.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!