应用激光, 2013, 33 (2): 169, 网络出版: 2013-05-22   

紫铜激光焊接工艺研究

Study on Laser Welding of Copper
作者单位
1 武汉职业技术学院电子信息工程学院, 湖北 武汉 430074
2 武汉华工激光工程有限公司, 湖北 武汉 430223
摘要
用波长为1.06 μm的Nd∶YAG激光器对高反射率、高导热的紫铜进行激光焊接,通过激光对紫铜表面进行预处理并合理地设置脉冲激光的脉冲波形, 脉冲电流、频率、焊接速度等工艺参数成功地对紫铜进行了脉冲激光焊接。 结果表明,首先用LWY400型激光焊接设备对两块厚度为1 mm的紫铜进行激光预处理, 产生黑色的CuO黑色薄膜以提高铜对激光的吸收率, 然后将两块厚度为1 mm的紫铜进行对接激光焊,选用快速上升、缓慢下降的脉冲波形,在负离焦1 mm的情况下,可以完全焊透1 mm的紫铜。进一步能谱(EDS)分析表明, 紫铜通过激光预处理后的表面生成了CuO黑色薄膜。因此, 用激光对紫铜进行预处理后, 可以实现紫铜的激光焊接。
Abstract
Utilize Nd∶YAG laser with the wavelength of 1.06 μm for laser welding of high reflectivity, high thermal conductivity. Pulse laser welding is conducted successfully on copper through heat treatment on the copper surface and reasonably configurations of laser pulse frequency、welding speed and other process parameters. The results show that firstly, utilize LWY400 laser welding equipment to make laser pretreatment for the two piece of 1mm thickness copper and produce black film that is CuO which enhance the absorptivity of copper and then make laser welding for two piece of 1mm thickness copper, select pulse waveform that rising fast, and then slowing down, in the negative defocus condition of 0.2 mm, the 1mm of copper is penetrated. Further energy spectrum (EDS) analysis indicates that copper generate CuO black film by Laser pretreatment. So we can realize the laser welding of copper after the copper be pretreated by laser.

吴晓红, 向发午, 刘勇, 程英. 紫铜激光焊接工艺研究[J]. 应用激光, 2013, 33(2): 169. Wu xiaohong, Xiang fawu, Liu yong, Cheng ying. Study on Laser Welding of Copper[J]. APPLIED LASER, 2013, 33(2): 169.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!