光学学报, 2013, 33 (s1): s114018, 网络出版: 2013-06-25  

Ni3Al基定向凝固高温合金皮秒脉冲激光打孔研究

Picosecond Laser Drilling Study of Directional Solidification Ni3Al-Based Superalloy
作者单位
1 北京科技大学材料科学与工程学院无机非金属材料系, 北京 100083
2 北京航空制造工程研究所高能束流加工技术国防科技重点实验室, 北京 100024
摘要
研究了皮秒脉冲激光以旋切法在Ni3Al基定向凝固高温合金上加工的微孔,并采用扫描电子显微镜和电子能谱仪观察了微孔的加工质量及激光诱导的缺陷区。实验结果显示,在孔周围没有出现飞溅物和微裂纹等传统缺陷,在孔壁上发现了少量的熔渣和一层厚度在微米量级的氧化物再铸层,而再铸层中含有氧元素是由脉冲激光旋切加工过程中同轴吹高压氧气所致,在紧邻再铸层的部分区域出现了由热影响所产生的相变区。由于使用的激光束,其能量符合高斯分布,从而依据加工面温度分布和激光束能量分布的对应关系,对加工区再铸层厚度进行了理论计算,获得的数值与观测到的再铸层实际厚度趋于一致。
Abstract
Picosecond laser trepan drilling of the directional solidification Ni3Al-based superalloy is investigated. The processing quality of the holes and laser-induced defect zone are examined by means of scanning electron microscopy and energy dispersive spectrometer. The experimental results demonstrate that there is absence of conventional defects are detected in form of spatter and microcracks surrounding the holes, while some debris and thin recast layer composed of oxides appear in the wall of holes. According to the relationship between the temperature distribution of processing area and energy distribution of laser beam, the thickness value of the recast layer is calculated, which is basically in accordance with the measured thickness of recast layer.

孙瑞峰, 张晓兵, 曹文斌, 巩水利, 张晓鹏. Ni3Al基定向凝固高温合金皮秒脉冲激光打孔研究[J]. 光学学报, 2013, 33(s1): s114018. Sun Ruifeng, Zhang Xiaobing, Cao Wenbin, Gong Shuili, Zhang Xiaopeng. Picosecond Laser Drilling Study of Directional Solidification Ni3Al-Based Superalloy[J]. Acta Optica Sinica, 2013, 33(s1): s114018.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!