光学技术, 2013, 39 (5): 413, 网络出版: 2013-09-25  

模拟光刻中双层衰减相移接触孔衍射的理论公式

Formulation for simulating the bi-layer attenuated phase shift contact hole diffraction in lithography
作者单位
北京理工大学 光电学院, 北京100081
摘要
为了仿真光刻中接触孔掩模的衍射, 建立了严格的三维(3D)掩模模型。采用法向矢量法(NV)改善了接触孔掩模耦合波方程的收敛性。利用S矩阵求解线性方程组避免了数值不稳定问题。对于双吸收层衰减相移接触孔掩模, 当有效的截断级次达到1225级以上时, (0, 0)级次能得到更好的收敛结果。当有效的截断级次分别为1225级, 1369级, 1521级及1681级时, 衍射效率分别为23.64%, 23.67%, 23.63%及23.66%。利用建立的模型, 研究了偏振态随着掩模、入射光参数的变化关系。当线宽小于25nm时, 掩模主要透过TM偏振光。
Abstract
In order to evaluate the contact hole diffraction, a rigorous three dimensional (3D) mask model is established. The normal vector (NV) method is used to improve the convergence of the coupled-wave equation of the contact holes. The scattering-matrix approach (S-matrix algorithm) is applied to solve the linear equation system to avoid numerical instability. For the bi-layer attenuated phase shift contact hole, when the effective orders are above 1225, a more convergent result for the (0,0)th order is obtained.The diffraction efficiencies are 23.64%, 23.67%, 23.63% and 23.66%, when 1225, 1369, 1521 and 1681 orders, respectively, are retained in the computation. Then the change of polarization state as a function of mask and incident light properties is investigated by the mask models. When the linewidth of the contact hole is below 25nm, the mask is polarized predominately TM (transverse magnetic) polarization.

杨亮, 李艳秋, 刘克, 刘丽辉. 模拟光刻中双层衰减相移接触孔衍射的理论公式[J]. 光学技术, 2013, 39(5): 413. YANG Liang, LI Yanqiu, LIU Ke, LIU Lihui. Formulation for simulating the bi-layer attenuated phase shift contact hole diffraction in lithography[J]. Optical Technique, 2013, 39(5): 413.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!