大气与环境光学学报, 2013, 8 (5): 379, 网络出版: 2013-09-30   

用于气体浓度检测的VCSELs温度控制电路设计

Design of Temperature Control Circuit for VCSELs Used in Gas Concentration Measurement
作者单位
中国科学院安徽光学精密机械研究所, 安徽 合肥 230031
摘要
在利用可调谐半导体激光器吸收光谱(TDLAS)技术对气体浓度进行检测时,检测系统对激光器的温 度稳定性要求较高。提出了一种基于MAX1978的VCSEL激光器自动温度控制(ATC)方案,建立了 热电制冷器(TEC)的数学模型,对TEC的热惯性进行了测试,以热惯性测试结果为基础对比例积分微 分控制(PID)电路参数进行了整定,设计出了具有较高控制性能的温度控制电路。电路采用闭环 负反馈自动控制方案,采用PID电路产生控制信号,驱动TEC,实现了对VCSEL激光器工作温度的有 效控制。实验测试结果表明,电路的温度控制精度达到±0.03℃,较好地实现了激光器工作温度稳定性的控制。
Abstract
In the gas concentration measurement based on tunable diode laser absorption spectroscopy (TDLAS), higher temperature stability of laser is required. To meet this requirement, an automatic temperature control (ATC) proposal is put forward. A mathematical model of the thermoelectric cooler (TEC) is derived. The thermal inertia of TEC is tested and the proportional-integral-derivative (PID) control circuit parameters are determined. Finally, a temperature control circuit with high control performance is designed. The closed negative feedback loop was adopted for the circuit. PID circuit is used to generate control signal and drive the TEC. High accuracy controlling of VCSELs working temperature is realized. The results show that the temperature stability is up to ±0.03℃. The temperature control circuit could effectively keep the laser working stable.

陈雪军, 庞涛, 张志荣, 董凤忠. 用于气体浓度检测的VCSELs温度控制电路设计[J]. 大气与环境光学学报, 2013, 8(5): 379. CHEN Xue-jun, PANG Tao, ZHANG Zhi-rong, DONG Feng-zhong. Design of Temperature Control Circuit for VCSELs Used in Gas Concentration Measurement[J]. Journal of Atmospheric and Environmental Optics, 2013, 8(5): 379.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!