光电工程, 2013, 40 (10): 85, 网络出版: 2013-10-23  

机械臂末端速度加速度的快速运算

A Fast Algorithm for Velocity and Acceleration at Manipulator’s End-effector
作者单位
1 山东航天电子技术研究所 , 山东 烟台 264000
2 中国科学院光电技术研究所, 成都 610209
摘要
通过对机械臂末端角位移和位移直接求导, 给出了末端速度和加速度的解析表示公式, 并由此给出了迭代计算程序。由于迭代计算不需要计算第 n-1个坐标系到第 0个坐标系的变换矩阵, 因此使算法得到了简化, 有利于提高机械臂控制的实时性。
Abstract
Differentiating angular displacement and displacement at manipulator’s end-effector directly, analysis formulas of angular velocity, linear velocity, angular acceleration and acceleration are given in this paper. According to these formulas, two iterative programs about velocity and acceleration at end-effector is given as well as. Since it is not necessary to count transform matrix from frame {n-1} to {0} in iterative program, the algorithms become simpler and thereby can be used to enhance the property of real-time in manipulator control.

安凯, 马佳光. 机械臂末端速度加速度的快速运算[J]. 光电工程, 2013, 40(10): 85. AN Kai, MA Jiaguang. A Fast Algorithm for Velocity and Acceleration at Manipulator’s End-effector[J]. Opto-Electronic Engineering, 2013, 40(10): 85.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!