应用光学, 2013, 34 (6): 894, 网络出版: 2013-12-04   

一种多光谱多光轴准直系统的设计

Design of multi-optical-axis and multi-spectral collimation system
作者单位
1 西安工业大学 光电工程学院,陕西 西安710032
2 西安应用光学研究所,陕西 西安 710065
摘要
为了实现快速、准确地校准机载多光谱光电跟踪设备中多光轴的一致性,设计一种基于卡塞格林式的光轴一致性校准系统。该系统使用卤素灯作为可见光光源,黑体作为红外光源,ZnS玻璃为基底的星点分划板提供无穷远目标,系统通光孔径为200 mm,焦距为1 500 mm,轴上点出射光平行性优于10″,满足多光谱多光轴的一致性检测中1′的要求。
Abstract
To calibrate the optical axis consistence of airborne multi-spectral and multi-axial optoelectronic tracking device fast and accurately, a calibration system for the consistence of optical axis based on Cassegrain optical system was designed. This system used halogen lights as the visible light source, blackbody as the infrared light source, and ZnS reticle was adopted to provide infinite object. The aperture of the system was 200 mm, and the focal length was 1 500 mm. The emergent beam parallelism of points on the axis was better than 10″, satisfying the demand of 1′ in the test of consistence of multi-optical axis and multi-spectrum system.

纪小辉, 杨璐, 姜旭. 一种多光谱多光轴准直系统的设计[J]. 应用光学, 2013, 34(6): 894. JI Xiao-hui, YANG Lu, JIANG Xu. Design of multi-optical-axis and multi-spectral collimation system[J]. Journal of Applied Optics, 2013, 34(6): 894.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!