中国激光, 2013, 40 (12): 1207001, 网络出版: 2013-12-05   

折射率和金属膜厚度对表面等离子体共振场增强表面增强拉曼散射的影响研究

Study on the Effect of Refractive Index and Metal Film Thickness on Surface Plasmon Resonance Field Enhanced Surface-Enhanced Raman Scattering
作者单位
1 中国科学院长春光学精密机械与物理研究所应用光学国家重点实验室, 吉林 长春 130033
2 吉林大学超分子结构与材料国家重点实验室, 吉林 长春 130012
摘要
研究了Kretschmann型表面等离子体共振(SPR)结构中电介质折射率、柱面镜折射率以及金属膜厚度对SPR场增强表面增强拉曼散射(SERS)信号的影响。实验结果表明SPR与SERS之间存在着本质上的相关性,电介质折射率、耦合柱面镜折射率以及金属膜厚度均对SPR场增强SERS有较大影响。相同条件下,电介质的折射率越小,SPR场对SERS信号的增强越强,激发的SERS信号的强度越大;柱面镜折射率越大,SPR对SERS的增强越明显; SERS信号强度随着银膜厚度的增加先增大后减小,在银膜厚度为47 nm左右时SERS强度有最大值。
Abstract
The effects of dielectric refractive index, prism refractive index and metal film thickness on the surface plasmon resonance (SPR) field enhanced surface-enhanced Raman scattering (SERS) with Kretschmann SPR configuration are studied. Experimental results show that SPR and SERS are essentially correlative. The dielectric refractive index, prism refractive index and metal film thickness have a large effect on SPR field enhanced SERS. Under the same condition, when the dielectric refractive index is small, the SPR field used for SERS signal enhancement and the SERS are great. When the prism refractive index is great, the SPR field enhanced SERS is great. When the silver film thickness increases, the SERS signal intensity increases at first, and then decreases after the SERS signal reaches the largest value. When the silver film thickness is about 47 nm, the SERS signal is the largest.

刘钰, 张海涛, 徐抒平, 徐蔚青. 折射率和金属膜厚度对表面等离子体共振场增强表面增强拉曼散射的影响研究[J]. 中国激光, 2013, 40(12): 1207001. Liu Yu, Zhang Haitao, Xu Shuping, Xu Weiqing. Study on the Effect of Refractive Index and Metal Film Thickness on Surface Plasmon Resonance Field Enhanced Surface-Enhanced Raman Scattering[J]. Chinese Journal of Lasers, 2013, 40(12): 1207001.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!