中国激光, 2013, 40 (s1): s105003, 网络出版: 2013-12-24  

全固态微结构弯曲不敏感型光纤研究

Analysis of All-Solid Microstructured Bend-Insensitive Optical Fiber
作者单位
1 江苏大学机械工程学院, 江苏 镇江 212013
2 宁波大学理学院, 浙江 宁波 315211
3 东南大学机械工程学院, 江苏 南京 211189
摘要
提出一种新型弯曲不敏感光纤:在阶跃光纤的包层中引入微结构,排布低折射率介质柱以降低弯曲损耗,通过在纤芯外侧设置低折射率环形区以去除高阶模,通过保持环形区和纤芯的折射率差以保证光纤的低连接损耗。采用有限元法分析了光纤的基模弯曲损耗和高阶模的束缚损耗。采用光束传播法分析了微结构光纤与普通单模光纤的连接损耗。计算结果表明:这种新型光纤的弯曲损耗不仅满足G.657 A1标准的要求,且与标准单模光纤的连接损耗小于0.08 dB。
Abstract
A novel bend-insensitive optical fiber is proposed. Low-index rods are included in the cladding to reduce the bending loss, and low refractive index ring surrounding the core is used to remove the higher-order mode. Index-contrast between the core and the low-index ring is conserved to ensure low splicing loss in standard single-mode optical fiber. The bending loss of the fundamental mode and the confinement loss of the higher-order mode are investigated by the finite-element method. The splicing losses between the bend-insensitive optical fiber and the single-mode optical fiber are investigated by the beam propagation method. The results show that the bending loss of the proposed fiber can meet the G.657 A1 standard and the splicing loss between the bend-insensitive optical fiber and the single-mode optical fiber is less than 0.08 dB.

龚天翼, 陈明阳, 周骏, 张永康. 全固态微结构弯曲不敏感型光纤研究[J]. 中国激光, 2013, 40(s1): s105003. Gong Tianyi, Chen Mingyang, Zhou Jun, Zhang Yongkang. Analysis of All-Solid Microstructured Bend-Insensitive Optical Fiber[J]. Chinese Journal of Lasers, 2013, 40(s1): s105003.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!