中国激光, 2014, 41 (4): 0416002, 网络出版: 2014-02-28   

基于Matlab的变焦光学系统设计 下载: 749次

Zoom Optical System Design Based on Matlab
作者单位
1 长春理工大学空间光电技术研究所, 吉林 长春 130022
2 长春理工大学光电工程学院, 吉林 长春 130022
摘要
为了降低变焦距系统设计时对经验的过度依赖,提出用Matlab仿真分析来分配变焦系统各组元光焦度。以组元之间的间隔为初始量,把变倍组的物距作为自由量,通过计算公式求出满足间隔要求的光焦度分配和组元运动形式。并通过Matlab仿真,画出变焦过程中各组元移动轨迹,分析各组元偏角、视场角等因素对系统复杂程度的影响,合理分配各组的光焦度,最后制定出初始结构。对没有经验的设计者,是一种很好的方法。为了验证该方案的可行性,设计一个14×正组补偿型变焦系统,所设计系统优化后的光焦度分配值和计算的结果很接近。
Abstract
A method which can well distribute optical power of each component of zoom system through analysis of Matlab to bring down excessive dependence on experiences is proposed. We treat the gaps between each component as the initial configuration, and the object distance of zoom group as free parameters, then find out the optical power distribution and movement type which meet the space requirement. Matlab simulation can draw mobile trajectory of each component in the process of zooming and analyze the drift angle, field angle and other factors affect on the system complexity, which may help to achieve the reasonable allocation of optical power and initial configuration. It is a wonderful idea for the green hands. A 14× zoom optical system is designed, and its optimized optical power allocation is close to the results of calculation using Matlab, which may verify the feasibility of the scheme.

高铎瑞, 钟刘军, 赵昭, 付强, 刘显著. 基于Matlab的变焦光学系统设计[J]. 中国激光, 2014, 41(4): 0416002. Gao Duorui, Zhong Liujun, Zhao Zhao, Fu Qiang, Liu Xianzhu. Zoom Optical System Design Based on Matlab[J]. Chinese Journal of Lasers, 2014, 41(4): 0416002.

本文已被 12 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!