中国激光, 2014, 41 (s1): s108007, 网络出版: 2014-07-03  

高重频测距中多脉冲测量数据的处理方法研究

Processing Method Research for Multi-Pulse Measured Data of High Repetition Frequency Laser Ranging
作者单位
中国科学院云南天文台, 云南 昆明 650011
摘要
对高重频激光测距中多脉冲异常测距现象进行了分析和研究,采用地靶测量脉冲时间间隔、主波时刻校正和屏幕处理等技术方法,得出多脉冲测量数据的处理方法。将该方法应用于实测数据的处理,结果表明:按多脉冲测量数据进行处理后,有效数据量至少增加10%,均方根值基本一致,有利于测量回波信号较少但存在多脉冲现象时的中高轨卫星测量数据处理。
Abstract
The data processing method for multi-pulse measured data in high frequency laser ranging is analyzed and researched, and a useful method is got by measuring pulse interval time using ground target ranging, adjusting transmitting epoch, screen processing and etc. Applied to process ranging data from 1.2 m telescope high frequency laser ranging system, it indicates efficient data increasing 10% at least, and root mean square hardly changing. This is significant to middle and high orbit satellites laser ranging data process where the echo signal is a few but there is muti-pulse measured data phenomenon.

李祝莲, 郑向明, 伏红林, 何少辉, 熊耀恒. 高重频测距中多脉冲测量数据的处理方法研究[J]. 中国激光, 2014, 41(s1): s108007. Li Zhulian, Zheng Xiangming, Fu Honglin, He Shaohui, Xiong Yaoheng. Processing Method Research for Multi-Pulse Measured Data of High Repetition Frequency Laser Ranging[J]. Chinese Journal of Lasers, 2014, 41(s1): s108007.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!