应用激光, 2014, 34 (2): 131, 网络出版: 2014-06-03  

取向硅钢片激光表面刻槽的实验研究

ExperimentalStudy of Laser Grooving on Grain Oriented Silicon Steel Sheet
作者单位
华南师范大学激光加工技术实验室, 广东 广州 510006
摘要
首先分析取向硅钢片表面引入线状沟槽后对磁畴细化的效果。通过计算磁畴壁能量和沟槽附近出现磁极的静磁能之和, 使其最小来确定稳定的磁畴宽度。计算结果显示磁畴宽度基本取决于沟槽的深度、间距。利用纳秒和飞秒激光加工设备在取向硅钢片上引入沟槽后检测实际的磁性能, 实验发现, 紫外飞秒激光在取向硅钢片表面刻槽, 在不明显降低硅钢磁感应强度的前体下, 可以有效降低铁损值。
Abstract
The article first analyzes magnetic domain refinement effect on grain oriented silicon steel sheet after the introduction of linear grooves. By calculating the magnetic domain wall energy and the sum of the poles magnetostatic energy near groove to determine the minimum stable magnetic domain width. Calculation results show that the magnetic domain depends by the depth of the groove and width of spacing. Use the nanosecond and femtosecond laser equipment for processing grooves on grain oriented silicon steel sheet then measure the magnetic properties.It was found UV femtosecond laser use for generating grooves on grain oriented silicon steel sheet can reduce the iron loss without significantly reducing the magnetic flux density.

昝森巍, 张庆茂, 郭亮, 朱虹. 取向硅钢片激光表面刻槽的实验研究[J]. 应用激光, 2014, 34(2): 131. Zan Senwei, Zhang Qingmao, Guo Liang, Zhu Hong. ExperimentalStudy of Laser Grooving on Grain Oriented Silicon Steel Sheet[J]. APPLIED LASER, 2014, 34(2): 131.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!