强激光与粒子束, 2014, 26 (5): 051013, 网络出版: 2014-06-03  

神光-Ⅲ主机装置高速时序控制研究

Timing sequence control in SG-Ⅲ laser facility
作者单位
中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621900
摘要
神光-Ⅲ主机装置多束光脉冲之间的同步时序控制是通过三台任意波形发生器来实现的。提出由同步系统提供外时钟、外触发信号来实现三台任意波形发生器同步工作,并通过闭环监控手段来解决任意波形发生器开关机、重新加载时间波形后的相位跳变问题。实验验证证明采用该技术方案能够实现三台任意波形发生器的同步工作,保证了神光-Ⅲ主机装置高速时序的低抖动控制。
Abstract
The timing sequence between different pulses in SG-Ⅲ laser facility is controlled with three arbitrary waveform generators. External clock and external trigger, which are provided by the synchronization system, are used to make sure that all the three arbitrary waveform generators can work synchronously. The temporal waveform and phase change after reboot of the arbitrary waveform generator can be corrected through close-loop control. The verification experiment shows that the three arbitrary waveform generators can work synchronously using this technology, which ensures the synchronization error control of the SG-Ⅲ laser facility.

张晓璐, 王建军, 许党朋, 汪凌芳, 王超, 唐菱, 陈骥, 党钊. 神光-Ⅲ主机装置高速时序控制研究[J]. 强激光与粒子束, 2014, 26(5): 051013. Zhang Xiaolu, Wang Jianjun, Xu Dangpeng, Wang Lingfang, Wang Chao, Tang Ling, Chen Ji, Dang Zhao. Timing sequence control in SG-Ⅲ laser facility[J]. High Power Laser and Particle Beams, 2014, 26(5): 051013.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!