强激光与粒子束, 2014, 26 (6): 063013, 网络出版: 2014-06-03   

紧凑型矩形波导内功率合成器设计

Design of compact power combiner in rectangular waveguide
作者单位
1 清华大学 工程物理系, 北京 100084
2 西北核技术研究所, 西安 710024
摘要
介绍了一种基于常规速调管功率合成和脉冲压缩的微波源系统,为实现多路高峰值功率速调管的功率合成,设计了一种紧凑型、近平面结构的微波功率合成器。在2.856 GHz频点处,合成器各端口反射损耗和相对端口隔离度均大于45 dB。当两路峰值功率为50 MW的微波功率合成时,合成器内的最大场强约为9.6 MV/m,合成效率大于99%。在四端口功率合成器的基础上,通过两级合成可实现一种八端口微波功率合成器,当四路峰值功率50 MW的微波功率合成时,合成器内最大场强约为13.5 MV/m。
Abstract
This paper introduces a type of microwave source based on power combining of conventional klystrons and pulse compression. In order to achieve power combing of two high peak power klystrons, a compact planar power combiner was designed. The reflection losses of each ports and the isolation of opposite ports are both more than 45 dB at 2.856 GHz. Combining two 50 MW microwaves, the max surface field of four-port power combiner is about 9.6 MV/m, and the power combing efficiency is more than 99%. A type of eight-port combiner was realized based on two-stage combining of the four-port power combiner, when combining four 50 MW microwaves, the max surface field of the eight-port power combiner is about 135 MV/m.

熊正锋, 宁辉, 陈怀璧, 唐传祥. 紧凑型矩形波导内功率合成器设计[J]. 强激光与粒子束, 2014, 26(6): 063013. Xiong Zhengfeng, Ning Hui, Chen Huaibi, Tang Chuanxiang. Design of compact power combiner in rectangular waveguide[J]. High Power Laser and Particle Beams, 2014, 26(6): 063013.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!