Chinese Optics Letters, 2014, 12 (10): 100603, Published Online: Oct. 11, 2014  

Indoor gigabit 2 × 2 imaging multiple-input–multiple-output visible light communication Download: 1185次

Author Affiliations
Key Laboratory for Information Science of Electromagnetic Waves (MoE), Department of Communication Science and Engineering, Fudan University, Shanghai 200433, China
Abstract
We propose and experimentally demonstrate a 2 × 2 imaging multiple-input–multiple-output (MIMO) Nyquist single carrier visible light communication (VLC) system based on spectral efficient 64/32-ary quadrature amplitude modulation, as well as pre- and post-equalizations. Two commercially available red–green–blue light-emitting diodes (LEDs) with 3 dB bandwidth of 10 MHz and two avalanche photodiodes with 3 dB bandwidth of 100 MHz are employed. Due to the limited experiment condition, three different colors/wavelengths are transmitted separately. The achieved data rates of red, green, and blue LED chips are 1.5, 1.25, and 1.25 Gb/s, respectively. The resulting bit error ratios are below the 7% pre-forward error correction limit of 3.8 × 10-3 after 75 cm indoor transmission. To the best of our knowledge, this is the first experimental investigation of imaging MIMO system, and it is the highest data rate ever achieved in MIMO VLC system.

Yuanquan Wang, Nan Chi. Indoor gigabit 2 × 2 imaging multiple-input–multiple-output visible light communication[J]. Chinese Optics Letters, 2014, 12(10): 100603.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!