半导体光电, 2014, 35 (5): 820, 网络出版: 2014-10-23  

钝化剂自组装单层膜在铜铜键合工艺中的应用

Application of Self-assembled Monolayer Passivation for Cu-Cu Bonding
作者单位
华中科技大学 数字制造装备与技术国家重点实验室, 武汉 430074
摘要
解决铜铜键合工艺中的铜氧化问题对于三维集成技术具有重要意义。选用1-己硫醇做临时钝化剂, 通过自组装形式形成单层膜附着于铜表面, 以防止铜在存放时与空气接触而发生氧化, 键合前再使用乙醇等有机溶剂去除该单层膜。为了评估1-己硫醇的钝化效果, 采用接触角作为主要指标对实验结果进行评价。研究表明, 样片表面经过1-己硫醇处理后, 接触角极大增加, 并在空气中长时间保持稳定, 说明1-己硫醇具有良好的钝化效果, 采用此方法得到了高质量的铜铜热压键合样片。
Abstract
In this paper, self-assembled monolayer of 1-hexanethiol was formed on Cu thin layer to protect its surface against excessive oxidation during storage in the atmosphere. Then the self-assembled monolayer layer is dissolved using ethyl alcohol to expose the clean surface of Cu before bonding. The contact angles of the samples are measured so as to evaluate the passivation effect. The results indicate that after dealing with 1-hexanethiol, large contact angles of the samples can be acquired and remain stable in the air for a long time. Using this method, high-quality Cu-Cu thermo-compression bonding samples are obtained.

独莉, 廖广兰, 张昆, 宿磊, 薛栋民. 钝化剂自组装单层膜在铜铜键合工艺中的应用[J]. 半导体光电, 2014, 35(5): 820. DU Li, LIAO Guanglan, ZHANG Kun, SU Lei, XUE Dongmin. Application of Self-assembled Monolayer Passivation for Cu-Cu Bonding[J]. Semiconductor Optoelectronics, 2014, 35(5): 820.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!