应用光学, 2014, 35 (5): 761, 网络出版: 2014-10-23   

红外双波段目标模拟器方案与光学系统设计

Design for scheme of infrared dual-band target simulator and projection optical system
作者单位
1 哈尔滨工业大学 航天学院,黑龙江 哈尔滨 150010
2 中航工业江西洪都航空工业集团660所,江西 南昌 330024
摘要
通过对传统双波段目标模拟器的工作原理进行分析,针对其结构复杂以及生产成本较大的问题,提出一种只使用一套景象生成器和投影系统的双波段目标模拟器设计方案。利用分振幅的方法,通过滤光片和遮光片的遮挡滤光作用使2个波段的能量按特定的比例透过,在特定的积分时间下,探测器探测到2个波段的能量比不同,以此模拟不同红外目标。对设计方案中的投影系统进行光学设计,光学系统属于透射式,工作波段在3.3 μm~3.8 μm和4.4 μm~4.8 μm,F数为3.2,半视场角为1.1°,系统分辨率达到10 lp/mm,对300 K~3 000 K的黑体、灰体或选择体均可实现红外目标的模拟,同时模拟器产生的辐射能量也大于探测器探测到的最小能量,设计方案可行。
Abstract
Through the analysis of the traditional dual-band target simulator, a target simulator using only one generator and one projection system was put up to solve the problem of high cost and relatively complex structure. Using the method of division of amplitude, by the filtration of the filter and shading sheet, the energy of the two bands could transmit according to a specific proportion ,and in the specific integral time, detector could detect different energy ratios of the two bands, which could be used to simulate different infrared targets.Futhermore, the optic design of the projection system in the scheme was conducted.The projection system uses transimission model,which works in 3.3 μm~3.8 μm/4.4 μm~4.8 μm with a half field of view of 2.2° and an F number of 3.2 ,the system resolution could reach 10 lp/mm. The improved simulator can simulate the infrared objects of black body ,gray body,even selective body (300 K~3 000 K),with the radiation energy larger than the detected minimum energy ,proving scheme feasible .

钱育龙, 侯晴宇, 王治乐, 赵焕义. 红外双波段目标模拟器方案与光学系统设计[J]. 应用光学, 2014, 35(5): 761. Qian Yulong, Hou Qingyu, Wang Zhile, Zhao Huanyi. Design for scheme of infrared dual-band target simulator and projection optical system[J]. Journal of Applied Optics, 2014, 35(5): 761.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!