应用光学, 2014, 35 (5): 841, 网络出版: 2014-10-23   

基于像差校正的望远系统装调方法研究

Assembly and adjustment method based on aberrations correction for telescope optical system
作者单位
军械工程学院 电子与光学工程系,河北 石家庄 050003
摘要
为了保证望远镜装配完成后的成像质量和其他关键指标,提出基于像差校正的望远镜装调方法。首先利用Zemax建立光学系统模型,模拟光学零件失调状态,分析各零件的每种失调状态对各类像差的影响情况,进而定量计算光学零件对系统像差的敏感矩阵,得出系统失调特性,拟定最佳装调方案。在此理论分析的指导下,进行基于星点检验法的装调实验,装调后仪器各项指标达到要求,分辨率优于技术指标要求7.5″,验证了基于像差校正的光学系统装调方案的可行性。
Abstract
In order to ensure the imaging quality of certain type telescope at assembly stage, an alignment method based on aberrations correction was proposed. The optical system model of this telescope was set up and the misalignment phenomena for every optical element was simulated to analyze the changes of aberrations, then the sensitivity matrix of optical element for aberrations was calculated and the best alignment scheme was determined to improve the assembly quality and efficiency.Finally the alignment experiment based on star test was conducted, the results show that the technique indicators are all satisfied after alignment and the resolution is better than required 7.5″,which could validate the feasibility of our method and offer operability for the assembly and adjustment of this kind of instrument.

李莉, 李刚, 徐春梅, 沈洪斌, 王元铂, 殷建玲. 基于像差校正的望远系统装调方法研究[J]. 应用光学, 2014, 35(5): 841. Li Li, Li Gang, Xu Chunmei, Shen Hongbin, Wang Yuanbo, Yin Jianling. Assembly and adjustment method based on aberrations correction for telescope optical system[J]. Journal of Applied Optics, 2014, 35(5): 841.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!