激光与光电子学进展, 2014, 51 (12): 122202, 网络出版: 2014-11-19   

多组元全动型变焦物镜设计

All Lens Elements Movable Zoom Lens Design
作者单位
长春理工大学光电工程学院, 吉林 长春 130022
摘要
为了寻找求解多组元全动型变焦系统更加简单而有效的方法,采用程序法的形式,通过给定初始参数(各组元倍率、间隔),对目标系统进行初始数据计算;然后通过给定其限制条件(正切差、变焦曲线曲率、视场角和系统总长)作为控制指令对数据进行优化;最终给出满足条件的光焦度分配,并计算出系统各组元数据参数。为了验证该方法的可行性,以四组元全动型变焦物镜为例,计算出了满足条件的系统参数,通过程序给出的初始数据在光学设计软件Zemax 上完成光学系统仿真设计。将程序给出的光焦度分配与Zemax 给出的焦距结果进行了对比,结果表明两者数据非常接近,从而证实了该方法的可行性。
Abstract
In order to find a more simple and effective method to solve the formula of the all lens elements movable zoom lens, in this article, the computer program is adopted. With the given initial parameters (magnification of all elements、distance), the initial data are computed for the target optical system and the system data are optimized using the restrictive conditions (two tangent data difference、curvature of the zoom curve and total length of the system) as the command. Then the optical- power distribution which satisfies the condition is given out and the data of the optical system are computed. In order to test the practivity of this method, a four movable components zoom lens is designed as an example by using the initial data, given by the computer program, on the optical design software. Comparing the data of the optical power distribution with the Zemax simulation results, we find they agree well with each other, which proves the practicality of the method.

钟刘军, 安志勇, 高铎瑞, 赵昭. 多组元全动型变焦物镜设计[J]. 激光与光电子学进展, 2014, 51(12): 122202. Zhong Liujun, An Zhiyong, Gao Duorui, Zhao Zhao. All Lens Elements Movable Zoom Lens Design[J]. Laser & Optoelectronics Progress, 2014, 51(12): 122202.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!