Photonic Sensors, 2014, 4 (4): 373–378, Published Online: Dec. 8, 2014  

Design, Fabrication, and Measurement of Two Silicon-Based Ultraviolet and Blue-Extended Photodiodes

Author Affiliations
1 Faculty of Materials, Optoelectronics and Physics, Xiangtan University, Xiangtan, 411105, China
2 Hunan Engineering Laboratory for Microelectronics, Optoelectronics and System on A Chip, Xiangtan, 411105, China
3 The forty-eighth Research Institute of China Electronics Technology Group Corporation, Changsha, 410111, China
4 Department of Precision Mechanical Engineering, Shanghai University, Shanghai, 200444, China
Abstract
Two silicon-based ultraviolet (UV) and blue-extended photodiodes are presented, which were fabricated for light detection in the ultraviolet/blue spectral range. Stripe-shaped and octagon-ring-shaped structures were designed to verify parameters of the UV-responsivity, UV-selectivity, breakdown voltage, and response time. The ultra-shallow lateral pn junction had been successfully realized in a standard 0.5-μm complementary metal oxide semiconductor (CMOS) process to enlarge the pn junction area, enhance the absorption of UV light, and improve the responsivity and quantum efficiency. The test results illustrated that the stripe-shaped structure has the lower breakdown voltage, higher UV-responsicity, and higher UV-selectivity. But the octagon-ring-shaped structure has the lower dark current. The response time of both structures was almost the same.

Changping CHEN, Han WANG, Zhenyu JIANG, Xiangliang JIN, Jun LUO. Design, Fabrication, and Measurement of Two Silicon-Based Ultraviolet and Blue-Extended Photodiodes[J]. Photonic Sensors, 2014, 4(4): 373–378.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!