光电工程, 2014, 41 (12): 7, 网络出版: 2014-12-26   

大型离轴空间相机桁架支撑结构的设计

Design of Truss Support Structure for Large Off-axis Space Camera
作者单位
1 长春工业大学机电工程学院, 长春 130012
2 中国科学院长春光学精密机械与物理研究所, 长春 130033
3 吉林大学工程训练中心, 长春 130025
摘要
设计了一种 18杆空间相机桁架式主支撑结构, 解决了大型离轴三反空间相机主支撑结构要求同时具备轻质、高刚度、高强度和高热尺寸稳定性的难题。分析了采用整体框架结构及桁架支撑结构作为离轴三反空间相机主支撑结构的优缺点, 根据光学系统及相机整体结构尺寸特点, 确定了桁架支撑方案。分析对比了单层 6杆桁架结构和双层 18杆桁架结构的动静态刚度。合理选取了桁架式主支撑结构的材料, 分析了对支杆基频的影响因素, 优化设计了支杆的结构参数, 分析了 18杆桁架支撑结构的力、热特性, 并对支杆与杆接头的胶粘结强度进行了试验测试。有限元分析结果表明, 相机桁架主支撑结构一阶固有频率为 78.4 Hz, 次镜在 X向重力作用下绕 Y轴的最大倾角为 4.6″, 动静态刚度均满足设计指标要求。碳纤支杆拉伸试验结果表明, 胶粘结支杆的抗拉强度为 5.85 MPa, 满足强度要求。
Abstract
In order to keep a lightweight structure, high stiffness, strength and thermal dimensional stability, an 18-strut truss main support structure was designed for large-scale and off-axis Three-mirror Anastigmat (TMA) space camera. The merit and demerit of main support structure of off-axis TMA space camera with overall framework and truss support structure were analyzed. The truss support scheme was confirmed on the basis of optical system and the whole structure size characteristic of the camera. The dynamic and static stiffness single-layer 6-strut and double-layer 18-strut truss structure were analyzed and contrasted. The materials of truss main support structure were selected reasonably. The influence factor of the strut fundamental frequency was analyzed, and then the structure parameters of the strut were optimally designed. The mechanical and thermal characteristics of 18-strut truss support structure were analyzed. Finally, adhesive strength between strut and pipe joint was tested. As shown as the result of finite element analysis, the fundamental frequency of truss main support structure is 78.4 Hz, and the maximum tilt angle of the secondary mirror is 4.6″ around Y axis under the action of gravity in X axis direction. Dynamic and static stiffness index meet the design requirements. The tensile test results show that the strut tensile strength of the adhesive joint is 5.85 MPa, which is satisfied to strength requirements.

关英俊, 徐宏, 李志来, 高喜军, 杨利伟. 大型离轴空间相机桁架支撑结构的设计[J]. 光电工程, 2014, 41(12): 7. GUAN Yingjun, XU Hong, LI Zhilai, GAO Xijun, YANG Liwei. Design of Truss Support Structure for Large Off-axis Space Camera[J]. Opto-Electronic Engineering, 2014, 41(12): 7.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!