首页 > 论文 > 光电工程 > 41卷 > 12期(pp:14-18)

大口径望远镜方位轴系静承载能力分析

Static-load Supporting Capability Analysis for Azimuth Shafting of a Large-aperture Telescope

乔明   任戈   谭毅  
  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

针对大口径光学望远镜方位轴系的结构特点, 利用 ANSYS建立了相应结构的二维简化模型, 对接触刚度、接触算法等接触仿真相关参数进行了简要分析与设定。结果表明, 与经典的赫兹接触理论相比, ANSYS计算得到的最大接触压力与弹性趋近量误差分别为 4.3%和 0.4%, 验证了 ANSYS分析中模型建立和参数设置的合理性。再利用所得 ANSYS模型, 结合轴承实际参数, 对该望远镜方位轴系的平面止推轴承进行了静力学分析, 建立了一种静承载能力曲线的绘制方法, 为大口径望远镜方位轴系设计提供了可靠的理论依据。

Abstract

According to the structure of large-aperture telescopes azimuth shafting, ANSYS was utilized to establish the two-dimensional model. The contact stiffness, contact algorithm and other contact simulation parameters were analyzed and set. The results show that, compared with the classical Hertz contact theory, the error of maximum contact pressure and elastic approach which were calculated by ANSYS are 4.3% and 0.4%. The results verify the rationality of the model and the parameter setting in ANSYS analysis. Using the ANSYS model, the static analysis of the plane thrust bearing was conducted. A method for the drawing of static bearing capacity curve is established, which provides a reliable theoretical basis for the design of the azimuth shafting of large-aperture telescopes.

Newport宣传-MKS新实验室计划
补充资料

中图分类号:TH12;TH75

DOI:10.3969/j.issn.1003-501x.2014.12.003

所属栏目:光机电控制

基金项目:国家 863高技术资助项目

收稿日期:2014-07-18

修改稿日期:2014-08-08

网络出版日期:--

作者单位    点击查看

乔明:中国科学院光电技术研究所, 成都 610209中国科学院光束控制重点实验室, 成都 610209中国科学院大学, 北京 100049
任戈:中国科学院光电技术研究所, 成都 610209中国科学院光束控制重点实验室, 成都 610209
谭毅:中国科学院光电技术研究所, 成都 610209中国科学院光束控制重点实验室, 成都 610209

联系人作者:乔明(qiaoming123@gmail.com)

备注:乔明(1989-), 男(汉族), 内蒙古准格尔旗人。硕士研究生, 主要从事光机结构分析和优化。

【1】Pierre Y Bely. The Design and Construction of Large Optical Telescopes [M]. New York: Springer, 2003: 202-251.

【2】冈本纯三. 球轴承的设计计算 [M]. 北京: 机械工业出版社, 2003: 1-14.

【3】Kogut L, Etsion I. Elastic-plastic contact analysis of a sphere and a rigid flat[J]. Journal of Applied Mechanics-Transactions of the Asme(S0021-8936), 2002, 69(5): 657-662.

【4】Kogut L, Etsion I. A finite element based elastic-plastic model for the contact of rough surfaces [C]// 58th Annual Meeting of the Society-of-Tribologists-and-Lubrication-Engineers, New Yourk, Apr 28-May 01, 2003, 46: 383-390.

【5】Jackson RL, Green I. A finite elements study of elasto-plastic hemispherical contact against a rigid flat[J]. Journal of Applied Mechanics-Transactions of the Asme(S0742-4787), 2005, 127(2): 343-354.

【6】Etsion I, Kligerman Y, Kadin Y. Unloading of an elastic-plastic loaded spherical contact[J]. International Journal of Solids and Structures(S0020-7683), 2005, 42(13): 3716-3729.

【7】WANG Fan, Keer L M. Numerical simulation for three dimensional elastic-plastic contact with hardening behavior[J]. Journal of Applied Mechanics-Transactions of the Asme(S0742-4787), 2005, 127(3): 494-502.

【8】DU Yan, CHEN Lei, McGruer Nicol E, et al. A finite element model of loading and unloading of an asperity contact with adhesion and plasticity[J]. Journal of Colloid and Interface Science(S0021-9797), 2007, 312(2): 522-528.

【9】王槐, 代霜. 大接触角推力球轴承接触的有限元仿真研究[J].计算机仿真, 2013, 30(1): 305-309.
WANG Huai, DAI Shuang. Study on Contact Finite Element Simulation of the High-Angular Contact Thrust Ball Bearing[J]. Computer Simulation, 2013, 30(1): 305-309.

【10】王槐, 张景旭, 代霜. 基于 ANSYS的平面止推轴承有限元分析[J].现代制造工程, 2011(8): 75-79.
WANG Huai, ZHANG Jingxu, DAI Shuang. Analysis of the finite element contact model in the plane thrust bearing using ANSYS[J]. Modern Manufacturing Engineering, 2011(8): 75-79.

【11】苏立樾, 苏健. 转盘轴承静载荷承载曲线的创建[J].轴承, 2004(6): 1-3.
SU Liyue, SU Jian. Establishment of Static Load Curve of Turntable Bearings[J]. Bearing, 2004(6): 1-3.

引用该论文

QIAO Ming,REN Ge,TAN Yi. Static-load Supporting Capability Analysis for Azimuth Shafting of a Large-aperture Telescope[J]. Opto-Electronic Engineering, 2014, 41(12): 14-18

乔明,任戈,谭毅. 大口径望远镜方位轴系静承载能力分析[J]. 光电工程, 2014, 41(12): 14-18

被引情况

【1】乔明,任戈,谭毅,向春生. 大口径望远镜平面止推轴承静力学分析. 光电工程, 2015, 42(9): 55-59

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF