红外与毫米波学报, 2014, 33 (6): 619, 网络出版: 2014-12-26   

毫米波带状注电子枪的设计方法

The design method of millimeter-wave sheet-beam electron gun
作者单位
电子科技大学 物理电子学院 微波电真空器件国家级重点实验室, 四川 成都 610054
摘要
利用理论分析和仿真模拟相结合的方法对带状电子注的产生进行了系统的研究,并提出了一种带状注电子枪的设计方法.首先通过理论分析,提出了一种计算带状注电子枪结构参数的迭代算法,即根据注电压、注电流、电子注注腰处半厚度、阴极半厚度和阴极宽度,计算出带状注电子枪的阴极柱面半径、阴阳极间距、阳极柱面半径和射程等主要参数;在此基础上,通过仿真模拟,为毫米波真空电子器件设计了一种带状注电子枪.
Abstract
Sheet-beam formation has been studied using the combination method of theory analysis and simulation verification. A design theory of the sheet-beam electron gun has been proposed. The beam voltage, the beam current, the half-thickness of beam at the waist position, the half-thickness of the cathode, and the width of the cathode are used to calculate the parameters of the sheet-beam electron gun such as the cathode cylindrical radius, the anode-cathode spacing, the anode cylindrical radius, and the throw. Then through simulation, the sheet-beam electron gun for millimeter-wave vacuum electron devices are set up based on the theoretical results.

唐先锋, 段兆云, 王战亮, 唐涛, 魏彦玉, 宫玉彬. 毫米波带状注电子枪的设计方法[J]. 红外与毫米波学报, 2014, 33(6): 619. TANG Xian-Feng, DUAN Zhao-Yun, WANG Zhan-Liang, TANG Tao, WEI Yan-Yu, GONG Yu-Bin. The design method of millimeter-wave sheet-beam electron gun[J]. Journal of Infrared and Millimeter Waves, 2014, 33(6): 619.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!