发光学报, 2015, 36 (2): 219, 网络出版: 2015-02-15   

二氧化钛改性8-羟基喹啉铝对有机电致发光器件抗老化性能的提高

TiO2 Doped Alq3 as Emitting Layer to Improve The Anti-aging Performance of OLED
作者单位
1 太原理工大学 新材料界面科学与工程教育部重点实验室, 山西 太原 030024
2 太原理工大学 新材料工程技术研究中心, 山西 太原 030024
摘要
以二氧化钛改性8-羟基喹啉铝复合材料(TiO2-Alq3)为发光层制备了有机电致发光器件(OLED)。在器件未封装条件下, 复合材料TiO2-Alq3制备的器件较纯Alq3制备的器件抗老化性能有所提高。通过化学计量比调控, 当钛酸四丁酯与硫酸铝的投料比为1∶10时制备的复合材料TiO2-Alq3可获得抗老化性能最优的OLED器件。在空气中老化48 h后, 该器件亮度仍保持在起始亮度的89.7%, 电流效率保持在起始值的76.6%, 而纯Alq3制备的OLED器件在同样测试条件下已失活。
Abstract
Composite material titanium dioxide doped tris(8-hydroxyquinoline)-aluminium (TiO2-Alq3) was applied in organic lighting emitting diodes (OLED) as emitting material. Without encapsulation, it is found that TiO2-Alq3 as emitting layer in OLED exhibits significantly improved anti-aging performance than that of the pure Alq3-based OLED. It can be attributed to the introduced of TiO2, which has good photochemical stability and the absorption ability in UV, etc. The OLED with optimized anti-aging performance was obtained after tuning the molar ration of reactants tetrabutyl titanate and aluminium sulfate to 1∶10. After aging 48 h in the air, the luminance and current efficiency of this optimized OLED still remained in the initial state of 89.7% and 79.6%, respectively. This work paves a new way to improve the anti-aging performance of OLED by modifying the emitting materials.

李菀丽, 武聪伶, 苗艳勤, 李源浩, 王华, 郭鹍鹏. 二氧化钛改性8-羟基喹啉铝对有机电致发光器件抗老化性能的提高[J]. 发光学报, 2015, 36(2): 219. LI Wan-li, WU Cong-ling, MIAO Yan-qin, LI Yuan-hao, WANG Hua, GUO Kun-peng. TiO2 Doped Alq3 as Emitting Layer to Improve The Anti-aging Performance of OLED[J]. Chinese Journal of Luminescence, 2015, 36(2): 219.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!