强激光与粒子束, 2015, 27 (2): 024103, 网络出版: 2015-02-15  

基于NOA73微球与SU-8微柱的微探针制作

Fabrication of microprobe based on NOA73 and SU-8
作者单位
1 中北大学 电子测试技术重点实验室, 太原 030051
2 中北大学 仪器科学与动态测试教育部重点实验室, 太原 030051
摘要
集成紫外固化胶NOA73微球与SU-8微柱制造的亚毫米探针, 可以作为关键部件应用于三坐标测量机。NOA73微球通过NOA73对其他溶液的界面张力形成, 柱子由深紫外光穿过微球曝光SU-8形成。这种新技术利用甘油补偿NOA73与空气折射率差, 使得紫外光透过NOA73微球后保持接近平行。最终得到高深宽比的探针结构, 高度超过1 200 μm, 微柱侧壁与基底呈89°。
Abstract
Fabrication of microprobe integrated with a UV-curable adhesive, NOA73 microspheres and SU-8 micro pillars is presented, which can be applied to coordinate measurement machine (CMM) as a key component. The NOA73 microsphere is formed by the interfacial tension between NOA73 and other solution, the pillar is formed from SU-8 deep ultraviolet lithography. The glycerol is coated for compensating the refractive index difference between NOA73 and air, thus UV light still keep parallel, after propagating through the NOA73 microspheres. The high aspect ratio microprobe is obtained with the height above 1 200 μm and the angle between micro-pillar and substrate is 89°.

王伟, 贾志浩, 段俊萍, 崔建利, 徐苏坪, 张斌珍. 基于NOA73微球与SU-8微柱的微探针制作[J]. 强激光与粒子束, 2015, 27(2): 024103. Wang Wei, Jia Zhihao, Duan Junping, Cui Jianli, Xu Suping, Zhang Binzhen. Fabrication of microprobe based on NOA73 and SU-8[J]. High Power Laser and Particle Beams, 2015, 27(2): 024103.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!