电光与控制, 2015, 22 (2): 69, 网络出版: 2015-03-23   

全息波导板构型优化

Optimization of a Holographic Waveguide Plate
作者单位
1 光电控制技术重点实验室, 河南 洛阳 471000
2 中国航空工业集团公司洛阳电光设备研究所, 河南 洛阳 471000
摘要
经过理论分析和计算,结合加工难度,提出了对全息波导显示系统中全息波导板的优化方法.对28°圆视场、30 mm×30 mm系统出瞳的全息波导显示系统中的全息波导板进行了优化.输入全息光栅尺寸、分束膜尺寸和输出全息光栅尺寸分别为5 mm×30 mm,30 mm×30 mm和30 mm×30 mm,波导板材料、波导板厚度、上波导板厚度和下波导板厚度分别为BaK7,3 mm,0.75 mm和2.25 mm时,能够满足所要求的全息波导显示系统视场和出瞳性能要求.通过优化得到的系统构型可以应用于全息波导头盔显示器、全息波导平视显示器等.
Abstract
A new method for optimization of the holographic waveguide plate in a holographic waveguide display is proposed according to theoretical analysis,calculations and manufacture difficulty level.A waveguide plate for a holographic waveguide display system,with 28° field of view and a large exit pupil about 30 mm×30 mm,is optimized by this method.The performances of this holographic waveguide display system can be satisfied by an input holographic grating of 5 mm×30 mm,an output holographic grating of 30 mm×30 mm,together with a glass(BaK7) waveguide of 3 mm thickness,which is divided into two waveguides,one has 0.75 mm thickness and another 2.25 mm,by the beam splitter.This configuration can be applied to a Head-Mounted Display(HMD) or a Head-Up Display(HUD).

刘玉杰, 李文强, 丁全心, 闫占军. 全息波导板构型优化[J]. 电光与控制, 2015, 22(2): 69. LIU Yu-jie, LI Wen-qiang, DING Quan-xin, YAN Zhan-jun. Optimization of a Holographic Waveguide Plate[J]. Electronics Optics & Control, 2015, 22(2): 69.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!