应用激光, 2015, 35 (1): 129, 网络出版: 2015-03-23
连续预电离脉冲氙灯电源研究
Research on Continous Preionized Pulse Xenon Lamp Power
摘要
设备采用外触发预电离模式, 分别设计了高压触发和预燃电流维持两个功能, 同时支持手动和自动两种触发模式。在连续预电离状态下氙灯放电电流达到200 mA, 该状态下能保证灯内一直有电流流过, 同时在主放电压1 400 V下氙灯可顺利完成主放电。该配套设备已成功应用在主动补偿脉冲发电机驱动带脉冲预燃电源系统中。
Abstract
The Equipmen is adopted based on external trigger and pre-ionization. The power is designed with high voltage trigger and maintain simmer current. At the same time, The power supply two types of manual and automatic trigger function. Discharge current of xenon lamp is up to 200mA under the continuous pre-ionization state, the current is flowing through the xenon lamp. Xenon lamp can successfully complete the discharge in the main voltage of 1 400. The equipment has been successfully applied in the active compensation pulse generator driven with pulse pre-ionization power supply system.
邵若燕, 刘建军, 李海兵, 吴睿骅, 梁海荣. 连续预电离脉冲氙灯电源研究[J]. 应用激光, 2015, 35(1): 129. Shao Ruoyan, Liu Jianjun, Li Haibing, Wu Ruihua, Liang Hairong. Research on Continous Preionized Pulse Xenon Lamp Power[J]. APPLIED LASER, 2015, 35(1): 129.