摘要

在高功率连续激光辐照下，变形镜(DM)表面产生的热形变会对入射激光引入附加相位畸变，进而降低光束质量。利用有限元分析软件ANSYS 建立了变形镜模型，分析比较了变形镜与高反镜热形变的特点，并讨论了变形镜结构参数对入射激光相位特性的影响。研究结果表明：与高反镜相比，变形镜的热形变更为明显；变形镜极头间距越小，热形变带来的高频相位畸变越多；极头长度对高频成分的影响较大，极头长度越短，热形变带来的高频成分越多，因而适当增加极头长度能够降低热形变带来的高频相位畸变；增大极头直径能使高频畸变所占比例有所降低，但会减弱变形镜的校正能力，因而在实际设计时应综合考虑。计算结果可为变形镜的参数优化设计提供一定参考价值。

Abstract

The thermal distortion of the deformable mirror (DM) arised from the high-power continuous laser beam brings about the phase distortion and further degrades the beam quality. The model for the DM is built up using the finite element analysis software ANSYS. The characteristics of the thermal distortion of the DM and the reflective mirror are analyzed and compared. The influence of structural parameters of the DM on the incident light phase are also discussed. The results indicate that, the thermal distortion of the DM is more obvious compared with the high reflective mirror. The high frequency phase distortion introduced by thermal distortion increases with the decreasing of the spacing of heads. The length of heads exhibits a significant influence on the high frequency components and the high frequency phase distortion increases with the decreasing of the length of heads. As a result, high frequency phase distortion introduced by the thermal distortion can be diminished through increasing the length of heads appropriately. The proportion of the high frequency phase distortion decreases with the increasing of the diameter of heads, leading to the decreasing of correction capability. Consequently, the diameter of heads should be considered comprehensively in the practical application. The results obtained can provide valuable reference for the parameter optimization of the DM.

补充资料

中图分类号：TN248;O439

DOI：10.3788/aos201535.0514001

所属栏目：激光器与激光光学

基金项目：中国科学院自适应光学重点实验室基金(LAOF201303)、四川省教育厅创新团队计划(13Td0048)

收稿日期：2014-12-15

修改稿日期：2014-12-31

网络出版日期：--

作者单位    点击查看

联系人作者：彭家琪(783028096@qq.com)

备注：彭家琪(1990—)，男，硕士研究生，主要从事变形镜热效应方面的研究。

【1】Guo Guangyan, Fan Zhongwei, Yu Jin, et al.. Solid-state laser distortion wavefront adaptive correction technology and its research progess[J]. Laser & Optoelectronics Progress, 2014, 51(3): 030001.
郭广妍, 樊仲维, 余锦, 等. 固体激光器波前畸变自适应校正技术及研究进展[J]. 激光与光电子学进展, 2014, 51(3): 030001.

【2】Guo Ailin, Zhu Haidong, Yang Zeping, et al.. Deformable mirror control algorithm based on the phase correction at the actuator position[J]. Acta Optica Sinica, 2013, 33(3): 0311001.
郭爱林, 朱海东, 杨泽平, 等. 基于驱动器位置相位校正的变形镜控制算法[J]. 光学学报, 2013, 33(3): 0311001.

【3】Liu Xudong, Liu Xinyue, Wang Jianli, et al.. Progress of the continuous surface deformable mirror based on piezo-ceramic actuator[J]. Laser & Optoelectronics Progress, 2014, 51(9): 090003.
林旭东, 刘欣悦, 王建立, 等. 基于压电陶瓷促动器的连续镜面变形镜研制进展[J]. 激光与光电子学进展, 2014, 51(9): 090003.

【4】Chen Xindong. Testing of a 9-points deformable mirror and its application in sapce camera system[J]. Acta Optical Sinica, 2013, 33(10): 1023001.
陈新东. 9点促动变形镜性能测试及在空间相机中的应用研究[J]. 光学学报, 2013, 33(10): 1023001.

【5】Liu Xudong, Liu Xinyue, Wang Jianli, et al.. Development and performance test of the 961-element deformable mirror[J]. Acta Optica Sinica, 2013, 33(6): 0601001.
林旭东, 刘欣悦, 王建立, 等. 961单元变形镜研制及性能测试[J]. 光学学报, 2013, 33(6): 0601001.

【6】Wang Sanhong, Liang Yonghui, Long Xuejun, et al.. Experimental research of laser beam cleanup for dynamic aberrations based on stochastic parallel-gradient-descent method[J]. Acta Optica Sinica, 2009, 29(1): 97-101
王三宏, 梁永辉, 龙学军, 等. 基于随机并行梯度下降方法的动态光束净化实验研究[J]. 光学学报, 2009, 29(1): 97-101.

【7】Yang Fu, Huang Wei, Zhang Bin, et al.. Measurement of weak absorption of thin film coatings irradiated by 10.6 μm laser[J]. High Power Laser and Particle Beams, 2004, 16(3): 277-280.
杨富, 黄伟, 张彬, 等. 10.6 μm 激光辐照下光学薄膜的微弱吸收测量[J]. 强激光与粒子束, 2004, 16(3): 277-280.

【8】Wu Shuang, He Yehuan, Zhang Bin. Analysis of thermal distortion of resonator mirror with high reflective coatings in different clamping ways[J]. Laser & Optoelectronics Progress, 2014, 51(2): 021402.
吴双, 贺也洹, 张彬. 不同夹持方式下不同高反膜系腔镜的热形变分析[J]. 激光与光电子学进展, 2014, 51(2): 021402.

【9】Zhou Qiong, Jiang Zongfu, Xi Fengjie, Study of thermal deformations induced optical aberrations for Al2O3 mirror in an optical system[J]. Chinese J Lasers, 2012, 39(10): 1002001.
周琼, 姜宗福, 习锋杰. 光学系统中白宝石分光镜的热变形像差分析[J]. 中国激光, 2013, 39(10): 1002001.

【10】Du Yanyi, An Jianzhu, Shu Xiaojian. Effect of thermal distortion of mirror on characteristics of laser beam in unstable resonator[J]. High Power Laser and Particle Beams, 2008, 20(8): 1333-1338.
杜燕贻, 安建祝, 束小建. 腔镜热变形对非稳腔光场特性的影响[J]. 强激光与粒子束, 2008, 20(8): 1333-1338.

【11】Zhang Rongzhu, Cai Bangwei, Yang Chunlin, et al.. Numerical method of the power spectral density[J]. High Power Laser and Particle Beams, 2000, 12(6): 661-664.
张蓉竹, 蔡邦维, 杨春林, 等. 功率谱密度的数值计算方法[J]. 强激光与粒子束, 2000, 12(6): 661-664.

【12】Zeng Zhige, Ling Ning, Rao Xuejun. Analysis for the finite element of the active thin mirror surface[J]. Opto- Electronic Engineering, 1995, 22(2): 8-19.
曾志革, 凌宁, 饶学军. 能动薄镜面的有限元分析[J]. 光电工程, 1995, 22(2): 8-19.

【13】R E Wagner. Imagery Utilizing Multiple Focal Planes[D]. America: University of Arizona, 1976.

【14】Ma Xuemei, Han Kai, Zhang Bin. Prediction for wavefront correction effect of discrete deformable mirror based on filter function[J]. Acta Optica Sinica, 2014, 34(1): 0101002.
马雪梅, 韩开, 张彬. 基于滤波函数的分立变形镜波前校正效果预估[J]. 光学学报, 2014, 34(1): 0101002.

【15】Zhou Renzhong. Adaptive Optics[M]. Beijing: National Defence Industry Press, 1996: 252-257.
周仁忠. 自适应光学[M]. 北京: 国防工业出版社, 1996: 252-257.

引用该论文

Peng Jiaqi,Hu Xiaochuan,Chen Lixia,Zhang Bin. Effect of Structural Parameters of Deformable Mirrors on Phase Characteristics of High-Power Laser[J]. Acta Optica Sinica, 2015, 35(5): 0514001

彭家琪,胡小川,陈丽霞,张彬. 变形镜结构参数对高功率激光相位特性的影响[J]. 光学学报, 2015, 35(5): 0514001

被引情况

【1】陈善球,刘超,许冰,叶玉堂. 通用自适应光学波前实时处理机的设计. 中国激光, 2015, 42(12): 1212001--1

【2】胡小川,王度,陈丽霞,张彬. 基于变形镜热形变预估模型的自校正效果分析. 中国激光, 2015, 42(12): 1202001--1

【3】张艳丽,张军勇,尤科伟,马伟新,朱俭,刘德安,朱健强. 高功率激光多程放大系统中的快速波形预测. 光学学报, 2016, 36(7): 714001--1

【4】陈丽霞,胡小川,张 彬,孙年春. 波前校正变形镜的疲劳损伤特性. 中国激光, 2016, 43(11): 1105002--1

【5】张艳丽,张军勇,尤科伟,马伟新,朱俭,刘德安,朱健强. 高功率激光多程放大系统中的快速波形预测. 高功率激光及等离子体物理研究论文集(专题), 2016, 14(1): 714001--1

【6】徐 娇,陈丽霞,游兴海,张 彬. 表面杂质诱导薄膜元件的热应力损伤. 光学学报, 2017, 37(6): 614003--1

【7】罗 帅,陈丽霞,张 彬. 变形镜的结构参数对其疲劳寿命的影响. 光学学报, 2017, 37(10): 1001003--1

【8】管相合,张艳丽,张军勇,朱健强. 高功率激光多程放大器的三维反演方法. 光学学报, 2018, 38(5): 514004--1