光子学报, 2015, 44 (4): 0422002, 网络出版: 2015-04-28   

凸非球面背向零位补偿检验的设计方法

Design of Back Null Compensator Test Method of Convex Aspherical Surface
作者单位
1 中国科学院上海技术物理研究所,上海 200083
2 同济大学, 上海 200083
摘要
为了实现大口径凸非球面的高准确度检测, 提出了凸非球面背向零位补偿检验方法.该方法在非球面背面引入辅助球面并在光路中加入球面补偿透镜来达到零位补偿检验.辅助球面既可以使凸非球面等效为凹非球面, 还可以补偿部分非球面法线像差.依据三级像差理论, 对辅助球面曲率半径及补偿透镜结构参量进行初始结构求解, 并编写了求解初始结构软件, 再利用光学设计软件对初始结构进行优化, 优化结果满足设计要求, 使凸非球面背向零位补偿检验理论化.在实际应用中, 以Φ120 mm凸非球面为例设计了凸非球面背向零位补偿检测系统, 检测系统设计的剩余波像差PV为0.024λ、RMS为0.007λ.利用此检测方法加工完成后的凸非球面的面形准确度优于λ/40.
Abstract
In order to measure a convex aspherical surface with large aperture, back null compensator test method was proposed. By introducing an auxiliary spherical surface at the back of convex aspherical surface and introducing spherical compensator in optic system, this novel test method is able to realize null test. The auxiliary spherical surface is not only essential to form an aspherical lens with convex aspherical surface, but also can compensate part of normal aberration of convex aspherical surface. Based on the third-order aberration theory, the radii of auxiliary spherical surface and optical parameter of compensator of initial system are calculated. By using commercial optical design soft the initial system is optimized and back null compensator is designed. An aspherical surface with 120 mm diameter is tested to prove the practicability of this method. As the result, the residual wavefront error is smaller than 0.007λ rms (PV 0.024λ). The precision of convex aspherical surface which is measured by this method is better than 1/40λ.

叶璐, 张金平, 郑列华, 郝沛明. 凸非球面背向零位补偿检验的设计方法[J]. 光子学报, 2015, 44(4): 0422002. YE Lu, ZHANG Jin-ping, ZHENG Lie-hua, HAO Pei-min. Design of Back Null Compensator Test Method of Convex Aspherical Surface[J]. ACTA PHOTONICA SINICA, 2015, 44(4): 0422002.

本文已被 9 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!