应用激光, 2015, 35 (2): 212, 网络出版: 2015-05-20   

工业纯钛板激光焊接工艺研究

Technology Research of Laser Welded Commercial Pure Titanium
作者单位
长春理工大学机电工程学院, 吉林 长春 130022
摘要
研究激光焊接对工业纯钛焊缝成形和力学性能的影响, 采用高功率Nd∶YAG激光器及焊接机器人, 通过焊接速度与激光功率的匹配, 研究了相同线能量输入条件下, 工业纯钛的激光焊接工艺。采用光学显微镜, 扫描电镜及拉伸试验机, 显微硬度测计等仪器对焊缝的微观形貌及力学性能进行了测试分析。试验结果表明, 焊缝和热影响区的显微硬度明显高于母材并且焊缝的硬度值最大, 焊接接头的抗拉强度高于母材。
Abstract
The effect of laser welding on the weld appearance and mechanical properties of commercial pure titanium were discussed by using high power Nd∶YAG laser and welding robot, and the laser welding process research through matching the welding speed and laser power in same energy input. The microstructure and mechanical properties of the welding joint are analyzed by means of metallographic microscope, scanning electron microscope, micro-hardness tester and material testing machine. The experimental results show that the microhardness of the weld seam and heat affected zone is higher than that of matrix, and the weld seam exhibits the highest values in the welded joint. The tensile strength of the welded joints is over the base metal.

倪聪, 石岩, 陈俊科, 蒋士春, 刘佳. 工业纯钛板激光焊接工艺研究[J]. 应用激光, 2015, 35(2): 212. Ni Cong, Shi Yan, Chen Junke, Jiang Shichun, Liu Jia. Technology Research of Laser Welded Commercial Pure Titanium[J]. APPLIED LASER, 2015, 35(2): 212.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!