发光学报, 2015, 36 (6): 651, 网络出版: 2015-06-25   

基于Taguchi方法的曲面底板LED阵列重影问题研究

Study of Cured Surface LED Array Multi-shadow Problem Based on Taguchi Method
史晨阳 1,2,*文尚胜 1,2陈颖聪 1,2
作者单位
1 华南理工大学 材料科学与工程学院, 广东 广州 510640
2 华南理工大学 发光材料与器件国家重点实验室, 广东 广州 510640
摘要
重影是阅读灯急需解决的一个重要问题.为了分析影响曲面底板配光的LED阵列照明重影的因子,采用Taguchi实验方法设计,并通过TracePro软件仿真实验,再运用ANOVA理论分析出因子对品质的影响程度,优化曲面底板LED阵列的各项结构参数.结果表明:最优化组合的最小重影为1.19 mm;LED芯片数量对重影宽度影响最大,占有50.17%的影响地位.进一步,为得到重影宽度更小的组合,可通过调小芯片与光轴夹角实现.
Abstract
Multi-shadow is an important problem for the reading lamp.In order to analyze the control factors of the multi-shadow of LED array on the curved surface plate,some experiments were designed by applying Taguchi method and simulated via TracePro software.After that,ANOVA theory was integrated to evaluate the influence of the control factors to the illumination.So that the control factors can be optimized efficiently.The experiment results show that the number of LEDs is the main influence on multi-shadow(50.17%)and the optimum combination of minimum multi-shadow is 1.19 mm.Furthermore,the best combination of the control factors can be obtained by adjusting the angle between the LED chips and the optical axis.

史晨阳, 文尚胜, 陈颖聪. 基于Taguchi方法的曲面底板LED阵列重影问题研究[J]. 发光学报, 2015, 36(6): 651. SHI Chen-yang, WEN Shang-sheng, CHEN Ying-cong. Study of Cured Surface LED Array Multi-shadow Problem Based on Taguchi Method[J]. Chinese Journal of Luminescence, 2015, 36(6): 651.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!