中国激光, 2015, 42 (7): 0702012, 网络出版: 2022-09-24   

掺铒光纤光梳在锶晶格钟中的应用研究

Application of an Er:Doped Fiber Comb for Sr Lattice Clock
作者单位
1 中国计量科学研究院时间频率所, 北京 100029
2 清华大学精密仪器系, 北京 100084
摘要
为了测量87Sr原子光晶格钟的钟激光频率和控制红冷却激光及光晶格激光的绝对频率,实验建立了一套掺铒光纤光学频率梳系统,并将其锁定到了氢钟参考信号上。光梳的可见光测量部分对689、698及813 nm 等特定波长功率进行了优化(在同一扩谱支路中不同时获得),其输出光谱功率大于120 mW,单点频率下的功率在2 nm 宽度时大于200 μW。实验得到的外激光和光梳梳齿拍频信号信噪比大于30 dB(在分辨率带宽300 kHz时观测),锁定后频率跟踪秒级稳定度优于60 mHz。
Abstract
For measurement of the 87Sr lattice clock probe laser frequency and controlling the red cooling laser and lattice magic wavelength etc, a frequency comb based on a mode-locked erbium fiber laser is built and locked to H-maser. The measurement realizes strong output at desired wavelengths, including 689, 698 and 813 nm (acquire at different time in one branch). The total visible spectrum power is about 120 mW and the power in the single frequency is more than 200 μW within 2 nm (full width half maximum). The beat signal between the comb tooth and the external laser with a signal-to-noise ratio is up to 30 dB (300 kHz resolution bandwidth). The tracking stability is better than 60 mHz at 1 s.

孟飞, 曹士英, 赵光贞, 赵阳, 方占军. 掺铒光纤光梳在锶晶格钟中的应用研究[J]. 中国激光, 2015, 42(7): 0702012. Meng Fei, Cao Shiying, Zhao Guangzhen, Zhao Yang, Fang Zhanjun. Application of an Er:Doped Fiber Comb for Sr Lattice Clock[J]. Chinese Journal of Lasers, 2015, 42(7): 0702012.

本文已被 6 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!