激光技术, 2015, 39 (4): 437, 网络出版: 2015-07-10  

冷轧带钢激光拼焊的焊缝在线检测研究

Research of on-line inspection of laser welding seam quality of cold rolled strips
作者单位
1 华中科技大学 光学与电子信息学院 激光加工国家工程研究中心, 武汉 430074
2 武汉钢铁股份有限公司, 武汉 430074
摘要
焊缝质量在线检测是冷轧带钢激光拼焊过程中的重要关键技术之一。为了解决武钢TRUMPF12000 轴快流激光拼焊设备在焊接过程中出现的错边、拼缝、焊缝形态等问题, 采用3个传感器分别采集焊前间隙图像信息、焊接过程图像信息以及焊后焊缝图像信息, 利用OTSU 自动计算图像阈值、运用投影矩阵的方法将图像坐标转换到工件坐标, 编写程序提取图像特征点的方式建立焊缝质量在线检测系统, 并以5m/min焊接速率对3mm厚冷轧板进行焊接实验, 测量焊接试样焊缝宽度相对误差在4.42%左右。结果表明, 焊缝质量检测系统可以计算出较为准确的焊缝宽度、焊缝错边量等信息。
Abstract
On-line inspection of seam quality is one of the most important key technologies in laser welding of cold rolled strips. In order to solve the welding problems of TRUMPF12000 fast-flow axial laser welding equipment used in WISCO, such as misalignment, seam and weld morphology, three sensors were adopted to acquire image information including gap images before welding, penetration images during welding, and seam images after welding and so on. OTSU operation was used to find the threshold automatically. Projective geometry was used to convert image coordinates to workspace coordinates. Codes were written to extract image features. On-line seam quality inspection system was founded. Experiments were performed to test the inspection accuracy of 3mm thickness cold steel at weld velocity of 5m/min. The relative error of seam width was about 4.42%. The results show that the seam inspection system can offer the accurate judgment comparatively.

盛利民, 唐霞辉, 彭浩, 潘吉兴, 裴云, 朱海云. 冷轧带钢激光拼焊的焊缝在线检测研究[J]. 激光技术, 2015, 39(4): 437. SHENG Limin, TANG Xiahui, PENG Hao, PAN Jixing, PEI Yun, ZHU Haiyun. Research of on-line inspection of laser welding seam quality of cold rolled strips[J]. Laser Technology, 2015, 39(4): 437.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!