光电工程, 2015, 42 (7): 89, 网络出版: 2015-08-25  

大气层外飞行器脱靶量的光学测量

Optical Measurement Method for Miss Distance of Exo-atmosphere Spacecraft
李国友 1,2,3,*付承毓 1,2何培龙 1,2杜升平 1,2,3韩志华 4
作者单位
1 中国科学院光电技术研究所, 成都 610209
2 中国科学院光束控制重点实验室, 成都 610209
3 中国科学院研究生院, 北京 100049
4 中国人民解放军95948部队, 兰州 732750
摘要
为了提高大气层外飞行器脱靶量的光学测量精度,提出了一种基于多测站同帧画幅数据的脱靶量处理算法.首先给出了光学测量脱靶量的基本原理;其次分析了各种角度误差对大气层外飞行器脱靶量测量的影响;然后建立了基于多测站同帧画幅数据的节省参数算法,并进行了脱靶量精度分析;最后给出了典型情况下的仿真结果.仿真结果表明:对大气层外飞行器脱靶量进行光学测量,必须修正CCD 曝光时延误差和焦距误差,通过充分利用多测站冗余同帧画幅数据可以提高脱靶量测量精度.
Abstract
To improve the optical measurement accuracy of exo-atmosphere spacecraft’s miss distance,a processing algorithm based on the same frame film data of multi-devices was presented.Firstly,the basic principle of miss distance measurement by optical method was put forward.Secondly,the influence on exo-atmosphere spacecraft’s miss distance by the angle measurement data errors was analyzed.Then,the sparse parameter algorithm based on the same frame film data of multi-devices was set up,and the precision of miss distance influenced by measurement errors was analyzed.Finally,the simulation results in typical cases were supplied.The simulation results show that the CCD exposure time error and the focal length error must be corrected in the optical measurement of exo-atmosphere spacecraft’s miss distance,and the precision of miss distance can be improved by using the redundant same frame film data of multi-devices.

李国友, 付承毓, 何培龙, 杜升平, 韩志华. 大气层外飞行器脱靶量的光学测量[J]. 光电工程, 2015, 42(7): 89. LI Guoyou, FU Chengyu, HE Peilong, DU Shengping, HAN Zhihua. Optical Measurement Method for Miss Distance of Exo-atmosphere Spacecraft[J]. Opto-Electronic Engineering, 2015, 42(7): 89.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!