激光与光电子学进展, 2015, 52 (9): 092802, 网络出版: 2015-08-28   

膛内目标有效信号自动提取方法

A Method of Automatic Extraction of Effective Signal of Target in Interior Ballistics
作者单位
中北大学山西省信息探测与处理技术重点实验室, 山西 太原 030051
摘要
雷达回波信号的有效提取是影响后续膛内多普勒信号处理的关键环节,目前内弹道工程应用中通常采用手动截取,该方法的误差较大、精度较低。针对上述问题,提出了一种雷达回波信号的自动提取方法。首先截掉明显的无用噪声部分,然后根据短时傅里叶变换(STFT)时频分析方法结合多普勒原理求出整段信号的速度,并判断出最大速度点作为有效信号的终点,利用改进的多时窗能量比法判定信号的起点。仿真信号及实际信号的实验结果表明,该方法对有效信号起点与终点提取的平均误差为0.1875 μs。
Abstract
The effective extraction of radar echo signal is a key step in the process of Doppler signal processing in interior ballistics. Currently manual interception is usually adopted in the engineering application. The method often causes high error and low precision. Aiming at these problems, an effective method of Doppler signal automatic extraction is proposed. The obvious noise can be intercepted. According to the principle of Doppler, the method uses short-time Fourier transform (STFT) to acquire the velocity of the entire signal. The maximun velocity point is judged as the terminal point for the effective signal. The improved method of multiple-window energy ratio is adopted to determine the starting point. The experimental results through simulated signal and actual signal show that the average error of the method to extract the starting points and terminal points of the effective signal is 0.1875 μs.

杨梦玲, 苏新彦, 王鉴, 姚金杰. 膛内目标有效信号自动提取方法[J]. 激光与光电子学进展, 2015, 52(9): 092802. Yang Mengling, Su Xinyan, Wang Jian, Yao Jinjie. A Method of Automatic Extraction of Effective Signal of Target in Interior Ballistics[J]. Laser & Optoelectronics Progress, 2015, 52(9): 092802.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!