光电子技术, 2015, 35 (2): 81, 网络出版: 2015-09-08  

氩等离子体处理聚合物/量子点表面对量子点发光二极管性能的影响

Influence of Argon Plasma Treatment on Polymer-QDs Hybrid Layer for Quantum-dot Light-emitting Diodes
作者单位
福州大学 物理与信息工程学院, 福州 350002
摘要
采用旋转涂布的方法在大气中制备了聚合物/量子点发光复合层, 利用氩等离子体处理的方法以去除聚合物/量子点复合层的表面的氧原子等猝灭中心。结果发现, 相较于无等离子处理的器件, 经过氩等离子处理, 量子点发光二极管能够产生具有狭窄发光峰的橙色光, 器件的启亮电压为3.5伏, 亮度更高, 并且电流密度没有明显的衰减现象, 器件更加稳定。
Abstract
The fabrication and performance of flexible quantum dot light-emitting devices (QD-LEDs) based on core/shell type CdSe/ZnS QDs are introduced. The polymer-QDs hybrid layer was fabricated by spin-coating in the atmosphere. The argon(Ar) plasma treatment was utilized to reduce the quenching centers and obtain a smooth surface morphology for the polymer-QDs hybrid layer. It is indicate that QD-LEDs ,with the Ar plasma treatment, can produce orange light with narrow emission peak.at a low EL turn-on voltage of about 3.5 V. And the more stable performance and higher brightness than the one without Ar plasma treatment were witnessed.

吴薇, 李福山, 吴朝兴, 吴晓晓, 胡雪花, 寇丽杰, 郭太良. 氩等离子体处理聚合物/量子点表面对量子点发光二极管性能的影响[J]. 光电子技术, 2015, 35(2): 81. WU Wei, LI Fushan, WU Chaoxing, WU Xiaoxiao, HU Xuehua, KOU Lijie, GUO Tailiang. Influence of Argon Plasma Treatment on Polymer-QDs Hybrid Layer for Quantum-dot Light-emitting Diodes[J]. Optoelectronic Technology, 2015, 35(2): 81.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!