光学学报, 2015, 35 (11): 1106002, 网络出版: 2015-11-03  

基于全光纤微振动传感器的定位系统研究

Research of Location System Based on All-Fiber Micro-Vibration Sensor
韩屏 1,2,*朱阳波 2
作者单位
1 光纤传感技术与信息处理教育部重点实验室, 湖北 武汉 430070
2 武汉理工大学信息工程学院, 湖北 武汉 430070
摘要
以噪声性质存在的微振动信号是造成干扰和影响机械加工精度的主要因素之一,消除干扰的前提是对微振源的准确测量和定位。针对现有基于光纤的定位系统存在的不足,设计了一种基于全光纤微振传感器的微振源定位系统,该系统要求最少4 个微振传感器,通过同时测量3 个传感器相对于另一个传感器的振动信号到达时间差(TDOA)来计算微振源的位置。通过实验对传感器和定位系统的性能进行验证,相对定位误差低于0.56%,且系统稳定可靠。
Abstract
The micro-vibration signal existing as noise is one of the main facts that cause the interference and affect the machining accuracy. The premise of interference elimination is the precise measurement and location of microvibration source. A micro-vibration location system based on full-fiber micro-vibration sensor is provided, aiming at the shortcoming of existing location system based on fiber. At least 4 micro-vibration sensors are needed in this system, and the position of micro-vibration source is calculated by measuring the time difference of arrival (TDOA) of vibration signal at one sensor relative to other 3 sensors. The performance of sensors and location system is verified by experiment, the relative location error is inferior to 0.56%, and it is stable and reliable.

韩屏, 朱阳波. 基于全光纤微振动传感器的定位系统研究[J]. 光学学报, 2015, 35(11): 1106002. Han Ping, Zhu Yangbo. Research of Location System Based on All-Fiber Micro-Vibration Sensor[J]. Acta Optica Sinica, 2015, 35(11): 1106002.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!