光通信研究, 2015 (5): 25, 网络出版: 2015-12-18  

同带泵浦光纤激光器用泵浦光纤设计

Design of fibers for tandem pumping fiber lasers
李海清 1,2谢璐 1,2陈瑰 1,2李进延 1,2
作者单位
1 武汉光电国家实验室, 武汉 430074
2 华中科技大学, 武汉 430074
摘要
同带泵浦结构是使激光器单根光纤达到输出功率极限的实现方法之一。文章针对同带泵浦结构激光器开展了研究, 首先通过建立简化模型进行数值模拟, 确定了同带泵浦结构激光器的最佳泵浦波长应位于1 010~1 030 nm; 然后研制了高效率1 018 nm光纤并进行了激光性能测试和对比分析。结果表明, 通过共掺使Yb3+离子发射次峰蓝移, 能促进1 018 nm激光的输出; 增大芯包比有助于提高1 018 nm输出激光效率。
Abstract
Tandem pumping structure is one of the approaches to enable every single fiber of a laser to reach the maximum output power limit. This paper carries out the research work on tandem pumping-structured lasers. It first establishes a simplified model for numerical simulation, determining that the optimal pumping wavelength of such lasers should be in the range of 1 010~1 030 nm. Then, it develops a highly efficient 1 018 nm fiber, conducts laser performance tests and carries out comparisons, analysis and discussions. The results show that co-doping causes sub-peak of the Yb3+ ionic emission blue shift, promoting the output of the 1 018 nm laser and that increasing the core/cladding ratio is conducive to improving the 1 018 nm laser output efficiency.

李海清, 谢璐, 陈瑰, 李进延. 同带泵浦光纤激光器用泵浦光纤设计[J]. 光通信研究, 2015, 41(5): 25. Li Haiqing, Xie Lu, Chen Gui, Li Jinyan. Design of fibers for tandem pumping fiber lasers[J]. Study On Optical Communications, 2015, 41(5): 25.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!