红外与激光工程, 2015, 44 (5): 1512, 网络出版: 2016-01-26   

长条形反射镜支撑结构设计与分析

Design and analysis of supporting structure for rectangular mirror
作者单位
中国科学院长春光学精密机械与物理研究所 中国科学院航空光学成像与测量重点实验室,吉林 长春 130033
摘要
为了降低航空光电侦察设备的整体质量,减小反射镜在复杂航空环境下的面形变化,利用有限元方法对某长条形反射镜组件结构进行了优化。首先,计算轻量化反射镜所需的支撑点数量,并对支撑点的位置进行优化。接着,为了解决温度变化时组件材料线胀系数不匹配带来的热变形问题,在支撑结构中引入了柔性铰链,并对柔性铰链参数进行了优化。最后,对反射镜组件进行面形精度分析,得到反射镜RMS为20.3 nm,小于1/30λ(λ=632.8 nm);对组件进行模态分析及试验,得到一阶固有频率分别为138 Hz和162 Hz,满足设计指标要求,分析及试验结果表明了该反射镜的支撑结构合理可行。
Abstract
The rectangular mirror supporting structure was designed and optimized for reducing the weight of the aerial optical remote sensor and minishing the shape error of the mirror, which was working in the bad aerial environment. First, the supporting point number of the ligntweighted mirror was calculated and the point position was optimized. Secondly, the flexible hinge was designed and optimized in the supporting structure in terms of the thermal deformation, which was indeced by the different expansion coefficients between the mirror and the back supporting structure. Finally, the surface shape was analyzed, the RMS was 20.3 nm, less than the design requirements, 1/30λ(λ=632.8 nm), the model was analyzed and tested, the first-order natural frequence was 138 Hz and 162 Hz. The results indicate that the designed structure is resonnable and feasible.

刘福贺, 程志峰, 石磊, 徐宁, 管坐辇. 长条形反射镜支撑结构设计与分析[J]. 红外与激光工程, 2015, 44(5): 1512. Liu Fuhe, Cheng Zhifeng, Shi Lei, Xu Ning, Guan Zuonian. Design and analysis of supporting structure for rectangular mirror[J]. Infrared and Laser Engineering, 2015, 44(5): 1512.

本文已被 12 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!