红外与激光工程, 2015, 44 (6): 1766, 网络出版: 2016-01-26   

内场仿真试验中激光指示信号生成方法

Laser signal generating method in internal field simulation experiment
作者单位
中国科学院长春光学精密机械与物理研究所,吉林 长春 130033
摘要
为了在内场对激光制导**的作战能力进行鉴定,设计了激光指示信号内场仿真系统。针对该仿真系统的组成及其工作原理,分别对激光指示信号的发散角、能量及方向的内场等效方法进行了分析,设计并标定了三者的动态调整装置。试验结果表明:该系统动态模拟的激光指示信号光斑直径相对误差小于2.5%,能量衰减动态调整误差小于0.2 dB,方位及俯仰的动态调整误差分别小于1.3 mrad、0.6 mrad。该仿真系统已应用于某光电对抗内场仿真项目中,可为激光制导**内场鉴定试验提供高仿真度的激光指示信号。
Abstract
In order to make appraisal of the combat capability for laser-guided weapons in internal field, the laser signal simulation system was designed. First of all, for the composition of the laser signal simulation system and its working principle, the internal field simulation and equivalent methods of laser signal divergence angle, energy and direction were analyzed respectively, and the dynamic adjustment of the three devices was calibrated. The experiment results show that: The relative error of dynamic simulation of the laser signal spot diameter is less than 2.5%, the dynamic adjustment error of energy attenuation is less than 0.2 dB, dynamic adjustment error of azimuth and elevation are respectively less than 1.3 mrad, 0.6 mrad. The simulation system has been applied in the photoelectric countermeasure simulation project, and this simulation system can provide high degree of laser signal simulation for laser-guided weapons qualification test.

方艳超, 王建军, 于国权, 崔爽, 李岩. 内场仿真试验中激光指示信号生成方法[J]. 红外与激光工程, 2015, 44(6): 1766. Fang Yanchao, Wang Jianjun, Yu Guoquan, Cui Shuang, Li Yan. Laser signal generating method in internal field simulation experiment[J]. Infrared and Laser Engineering, 2015, 44(6): 1766.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!